SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
XPG
1TB PCIe 3.0 x4 NVMe 1.3 M.2 2280 internal SSD with 3500/3000 MB/s sequential speeds, 390K/380K IOPS random performance, 640TB TBW, 2M-hour MTBF, and integrated heatsink
Options 1TB
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
The XPG SX8200 Pro is a 1TB internal SSD built on 3D NAND flash with a PCIe 3.0 x4 interface and NVMe 1.3 support. It targets PC enthusiasts, gamers and overclockers who need fast sequential and random performance for heavy workloads. The drive includes a heatsink and uses an SMI controller with SLC caching and a DRAM buffer to accelerate response times.
Moving from a SATA 6Gb/s SSD to this PCIe 3.0 x4 NVMe drive delivers peak sequential reads of 3500 MB/s and writes of 3000 MB/s, far exceeding the SATA bottleneck. The jump is worth it when workloads demand high 4K random performance up to 390,000 read and 380,000 write IOPS, or sustained throughput for multimedia editing and gaming. The 640 TBW rating and 2,000,000 hour MTBF back the upgrade for intensive use.
The PCIe 3.0 x4 interface caps maximum bandwidth, so sequential speeds cannot exceed the 3500/3000 MB/s ceiling even if the controller and NAND could go faster. Operating temperature is rated 0°C to 70°C; storage temperature spans -40°C to 85°C. Shock resistance is rated at 1500G for 0.5ms. LDPC error correction, end-to-end data protection and a RAID engine maintain data integrity within these physical constraints.
| Brand | XPG |
|---|---|
| Series | SX8200 Pro |
| Model | ASX8200PNP-1TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI |
| Max Sequential Read | ATTO: 3350 MB/s CDM: 3500 MB/s |
| Max Sequential Write | ATTO: 2800 MB/s CDM: 3000 MB/s |
| 4KB Random Read | Up to 390,000 IOPS |
| 4KB Random Write | Up to 380,000 IOPS |
| Terabytes Written (TBW) | 640TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Height | 0.640 |
| Width | 4.000 |
| Depth | 5.000 |
| Weight | 0.07 |
| 配送重量 | 0.02 kg |
| 梱包サイズ | 135 × 109 × 22 mm |
The drive fits a standard M.2 2280 slot with an M-key interface for PCIe 3.0 x4 NVMe 1.3 operation.
Insert the drive at an angle into the M.2 slot, press it flat, then secure it with the single retention screw; the step often missed is fastening that screw, which keeps the thermal pad in contact with the controller.
The drive is rated for 640 TBW; with typical consumer writes of 20–40 TB per year it should last well over a decade before wear-out becomes likely.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?