M.2 2280 stick with black heatsink and gold contacts

XPG

XPG ASX8200PNP-1TT-C SX8200 Pro 1TB internal SSD PCIe 3.0 x4 NVMe 1.3 M.2 2280

SKU CH-N3V6-G7PS0 MPN ASX8200PNP-1TT-C

1TB PCIe 3.0 x4 NVMe 1.3 M.2 2280 internal SSD with 3500/3000 MB/s sequential speeds, 390K/380K IOPS random performance, 640TB TBW, 2M-hour MTBF, and integrated heatsink

Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4, NVMe 1.3

Options 1TB

被劃上刪除線的選項確實存在，但本站並無供貨。

Fast boot and load times with up to 3500 MB/s sequential read
Responsive multitasking backed by 390,000 IOPS random read
Sustained write performance reaching 3000 MB/s sequential write
High endurance rated at 640 TBW for heavy workloads
Reliable operation guaranteed by 2,000,000 hours MTBF

US$148.99

0.00193298 BTC 依今日匯率

現貨 · 今日出貨

結帳時，匯率鎖定 30 分鐘。

運送至美國預估

UPS Worldwide Expedited 3～6 個工作天 US$39.90
DHL Express Worldwide 2～3 個工作天 US$74.90

再加 US$250.01，即享免費標準運送。

進口關稅由您所在國家於到貨時收取。

改寄其他地區

XPG SX8200 Pro 1TB NVMe 1.3 SSD

The XPG SX8200 Pro is a 1TB internal SSD built on 3D NAND flash with a PCIe 3.0 x4 interface and NVMe 1.3 support. It targets PC enthusiasts, gamers and overclockers who need fast sequential and random performance for heavy workloads. The drive includes a heatsink and uses an SMI controller with SLC caching and a DRAM buffer to accelerate response times.

Upgrade from SATA 6Gb/s to PCIe 3.0 x4 NVMe

Moving from a SATA 6Gb/s SSD to this PCIe 3.0 x4 NVMe drive delivers peak sequential reads of 3500 MB/s and writes of 3000 MB/s, far exceeding the SATA bottleneck. The jump is worth it when workloads demand high 4K random performance up to 390,000 read and 380,000 write IOPS, or sustained throughput for multimedia editing and gaming. The 640 TBW rating and 2,000,000 hour MTBF back the upgrade for intensive use.

PCIe 3.0 x4 interface limits and operating range

The PCIe 3.0 x4 interface caps maximum bandwidth, so sequential speeds cannot exceed the 3500/3000 MB/s ceiling even if the controller and NAND could go faster. Operating temperature is rated 0°C to 70°C; storage temperature spans -40°C to 85°C. Shock resistance is rated at 1500G for 0.5ms. LDPC error correction, end-to-end data protection and a RAID engine maintain data integrity within these physical constraints.

商品特色

Fast boot and load times with up to 3500 MB/s sequential read
Responsive multitasking backed by 390,000 IOPS random read
Sustained write performance reaching 3000 MB/s sequential write
High endurance rated at 640 TBW for heavy workloads
Reliable operation guaranteed by 2,000,000 hours MTBF

商品規格

Brand	XPG
Series	SX8200 Pro
Model	ASX8200PNP-1TT-C
Device Type	Internal Solid State Drive (SSD)
Used For	Consumer
Form Factor	M.2 2280
Capacity	1TB
Memory Components	3D NAND
Interface	PCI-Express 3.0 x4, NVMe 1.3
Controller	SMI
Max Sequential Read	ATTO: 3350 MB/s CDM: 3500 MB/s
Max Sequential Write	ATTO: 2800 MB/s CDM: 3000 MB/s
4KB Random Read	Up to 390,000 IOPS
4KB Random Write	Up to 380,000 IOPS
Terabytes Written (TBW)	640TB
MTBF	2,000,000 hours
HeatSink	with HeatSink
Operating Temperature	0°C ~ +70°C
Storage Temperature	-40°C ~ +85°C
Max Shock Resistance	1500G/0.5ms
Height	0.640
Width	4.000
Depth	5.000
Weight	0.07
出貨重量	0.02 kg
包裝尺寸	135 × 109 × 22 mm

商品問答

What slot size and keying does the M.2 2280 drive need on the motherboard?

The drive fits a standard M.2 2280 slot with an M-key interface for PCIe 3.0 x4 NVMe 1.3 operation.

How is the SX8200 Pro installed, and which step is often missed?

Insert the drive at an angle into the M.2 slot, press it flat, then secure it with the single retention screw; the step often missed is fastening that screw, which keeps the thermal pad in contact with the controller.

When will the 1 TB SX8200 Pro need replacement based on its endurance rating?

The drive is rated for 640 TBW; with typical consumer writes of 20–40 TB per year it should last well over a decade before wear-out becomes likely.

同類商品