אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Transparent yellow PLA filament spool on a plastic reel

Ziro 3D

Ziro 3D PLA Pro 3D Printers Accessory 1.75mm 1kg Transparent Yellow

SKU CH-VZ0J-5WGX8

Biodegradable 1.75 mm PLA filament with ±0.03 mm tolerance, 190–220 °C print range and 330 m per 1 kg spool

  • ColorTransparent Yellow
  • Precise prints with ±0.03 mm dimensional accuracy
  • Clean extrusion and minimal stringing for hassle-free printing
  • Biodegradable PLA reduces environmental impact
  • Transparent yellow gives luminous translucent finish
  • Works with most FDM printers using 1.75 mm filament

Filament for FDM printers

Ziro 3D PLA Pro is a 1.75 mm biodegradable PLA filament supplied on a 1 kg spool. The material prints between 190 and 220 °C with a bed temperature of 50 to 60 °C when a heated bed is used. Dimensional tolerance is held to ±0.03 mm across the full 330 m length.

Who this suits and who it does not

Makers who want a translucent yellow finish with low shrinkage and strong layer adhesion will appreciate the consistent extrusion. Users needing high-temperature resistance, flexible parts or engineering-grade mechanical properties should choose a different polymer family.

The spec that decides fit

The 1.75 mm diameter and ±0.03 mm tolerance determine whether the filament feeds reliably in a specific printer; verify that the machine accepts 1.75 mm spools before purchasing.

נקודות עיקריות

  • Precise prints with ±0.03 mm dimensional accuracy
  • Clean extrusion and minimal stringing for hassle-free printing
  • Biodegradable PLA reduces environmental impact
  • Transparent yellow gives luminous translucent finish
  • Works with most FDM printers using 1.75 mm filament

מפרט טכני

ColorTransparent Yellow

שאלות על הפריט הזה

What comes in the box and what must I buy separately?

The package contains a single 1 kg spool of 1.75 mm PLA Pro filament in Transparent Yellow, vacuum-sealed with desiccant. You will need a compatible FDM printer and, if not already owned, a spool holder that accepts a 209 mm diameter spool.

Which version or capacity should I choose?

This listing is the 1 kg, 1.75 mm diameter Transparent Yellow spool. The same series offers 37 colours; select a different colour if you need another hue, or confirm your printer uses 1.75 mm filament before ordering.

What does the ±0.03 mm tolerance mean for my prints?

The diameter stays within 0.03 mm of 1.75 mm along the full 330 m length, giving consistent extrusion, stable line width layer to layer, and fewer clogs or under-extrusion artefacts during printing.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.