نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Transparent yellow PLA filament spool on a plastic reel

Ziro 3D

Ziro 3D PLA Pro 3D Printers Accessory 1.75mm 1kg Transparent Yellow

SKU CH-VZ0J-5WGX8

Biodegradable 1.75 mm PLA filament with ±0.03 mm tolerance, 190–220 °C print range and 330 m per 1 kg spool

  • ColorTransparent Yellow
  • Precise prints with ±0.03 mm dimensional accuracy
  • Clean extrusion and minimal stringing for hassle-free printing
  • Biodegradable PLA reduces environmental impact
  • Transparent yellow gives luminous translucent finish
  • Works with most FDM printers using 1.75 mm filament

Filament for FDM printers

Ziro 3D PLA Pro is a 1.75 mm biodegradable PLA filament supplied on a 1 kg spool. The material prints between 190 and 220 °C with a bed temperature of 50 to 60 °C when a heated bed is used. Dimensional tolerance is held to ±0.03 mm across the full 330 m length.

Who this suits and who it does not

Makers who want a translucent yellow finish with low shrinkage and strong layer adhesion will appreciate the consistent extrusion. Users needing high-temperature resistance, flexible parts or engineering-grade mechanical properties should choose a different polymer family.

The spec that decides fit

The 1.75 mm diameter and ±0.03 mm tolerance determine whether the filament feeds reliably in a specific printer; verify that the machine accepts 1.75 mm spools before purchasing.

أبرز المميزات

  • Precise prints with ±0.03 mm dimensional accuracy
  • Clean extrusion and minimal stringing for hassle-free printing
  • Biodegradable PLA reduces environmental impact
  • Transparent yellow gives luminous translucent finish
  • Works with most FDM printers using 1.75 mm filament

المواصفات

ColorTransparent Yellow

أسئلة حول هذا المنتج

What comes in the box and what must I buy separately?

The package contains a single 1 kg spool of 1.75 mm PLA Pro filament in Transparent Yellow, vacuum-sealed with desiccant. You will need a compatible FDM printer and, if not already owned, a spool holder that accepts a 209 mm diameter spool.

Which version or capacity should I choose?

This listing is the 1 kg, 1.75 mm diameter Transparent Yellow spool. The same series offers 37 colours; select a different colour if you need another hue, or confirm your printer uses 1.75 mm filament before ordering.

What does the ±0.03 mm tolerance mean for my prints?

The diameter stays within 0.03 mm of 1.75 mm along the full 330 m length, giving consistent extrusion, stable line width layer to layer, and fewer clogs or under-extrusion artefacts during printing.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.