暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Transparent yellow PLA filament spool on a plastic reel

Ziro 3D

Ziro 3D PLA Pro 3D Printers Accessory 1.75mm 1kg Transparent Yellow

SKU CH-VZ0J-5WGX8

Biodegradable 1.75 mm PLA filament with ±0.03 mm tolerance, 190–220 °C print range and 330 m per 1 kg spool

  • ColorTransparent Yellow
  • Precise prints with ±0.03 mm dimensional accuracy
  • Clean extrusion and minimal stringing for hassle-free printing
  • Biodegradable PLA reduces environmental impact
  • Transparent yellow gives luminous translucent finish
  • Works with most FDM printers using 1.75 mm filament

Filament for FDM printers

Ziro 3D PLA Pro is a 1.75 mm biodegradable PLA filament supplied on a 1 kg spool. The material prints between 190 and 220 °C with a bed temperature of 50 to 60 °C when a heated bed is used. Dimensional tolerance is held to ±0.03 mm across the full 330 m length.

Who this suits and who it does not

Makers who want a translucent yellow finish with low shrinkage and strong layer adhesion will appreciate the consistent extrusion. Users needing high-temperature resistance, flexible parts or engineering-grade mechanical properties should choose a different polymer family.

The spec that decides fit

The 1.75 mm diameter and ±0.03 mm tolerance determine whether the filament feeds reliably in a specific printer; verify that the machine accepts 1.75 mm spools before purchasing.

特長

  • Precise prints with ±0.03 mm dimensional accuracy
  • Clean extrusion and minimal stringing for hassle-free printing
  • Biodegradable PLA reduces environmental impact
  • Transparent yellow gives luminous translucent finish
  • Works with most FDM printers using 1.75 mm filament

仕様

ColorTransparent Yellow

この商品に関する質問

What comes in the box and what must I buy separately?

The package contains a single 1 kg spool of 1.75 mm PLA Pro filament in Transparent Yellow, vacuum-sealed with desiccant. You will need a compatible FDM printer and, if not already owned, a spool holder that accepts a 209 mm diameter spool.

Which version or capacity should I choose?

This listing is the 1 kg, 1.75 mm diameter Transparent Yellow spool. The same series offers 37 colours; select a different colour if you need another hue, or confirm your printer uses 1.75 mm filament before ordering.

What does the ±0.03 mm tolerance mean for my prints?

The diameter stays within 0.03 mm of 1.75 mm along the full 330 m length, giving consistent extrusion, stable line width layer to layer, and fewer clogs or under-extrusion artefacts during printing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。