BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
OWC
8GB DDR4 2400 CL17 SODIMM module upgrades compatible NCR laptops, all-in-ones and NAS systems with 1.2V non-ECC memory
This OWC module delivers 8GB of DDR4 memory at 2400MHz with CL17 latency. It uses the standard 260-pin SO-DIMM form factor and operates at 1.2V. The kit is validated as a direct replacement for NCR part numbers 006-8626889, 1925-K006, 497-0531032 and 7772-K134.
Running at the JEDEC-defined 1.2V, the unbuffered non-ECC DRAM draws minimal power inside laptops, all-in-ones and NAS units. No heat spreader is fitted, so the module relies on the host chassis airflow. Backward compatibility with 2133MHz platforms allows installation in older slots without configuration changes.
The jump is worthwhile when a system ships with 4GB total or runs at 2133MHz, as the extra capacity and higher data rate improve multitasking and large-file handling. It is not suited for buyers who need ECC error correction, registered buffering or capacities above 8GB per slot.
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, open the memory door, align the notch on the 260-pin module with the slot key, insert at an angle and press down until both retention clips click; the step many skip is pressing firmly enough to engage both clips fully.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so it is designed to last the system's lifetime unless a capacity upgrade is desired.
The CAS latency of 17 cycles at 2400 MHz sets the timing floor; bandwidth and latency remain fixed at JEDEC PC4-19200 specifications during continuous operation.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?