BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
8GB DDR4 2400 CL17 SODIMM module upgrades compatible NCR laptops, all-in-ones and NAS systems with 1.2V non-ECC memory
This OWC module delivers 8GB of DDR4 memory at 2400MHz with CL17 latency. It uses the standard 260-pin SO-DIMM form factor and operates at 1.2V. The kit is validated as a direct replacement for NCR part numbers 006-8626889, 1925-K006, 497-0531032 and 7772-K134.
Running at the JEDEC-defined 1.2V, the unbuffered non-ECC DRAM draws minimal power inside laptops, all-in-ones and NAS units. No heat spreader is fitted, so the module relies on the host chassis airflow. Backward compatibility with 2133MHz platforms allows installation in older slots without configuration changes.
The jump is worthwhile when a system ships with 4GB total or runs at 2133MHz, as the extra capacity and higher data rate improve multitasking and large-file handling. It is not suited for buyers who need ECC error correction, registered buffering or capacities above 8GB per slot.
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, open the memory door, align the notch on the 260-pin module with the slot key, insert at an angle and press down until both retention clips click; the step many skip is pressing firmly enough to engage both clips fully.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so it is designed to last the system's lifetime unless a capacity upgrade is desired.
The CAS latency of 17 cycles at 2400 MHz sets the timing floor; bandwidth and latency remain fixed at JEDEC PC4-19200 specifications during continuous operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟