BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
8GB DDR4 2400 CL17 SODIMM module upgrades compatible NCR laptops, all-in-ones and NAS systems with 1.2V non-ECC memory
This OWC module delivers 8GB of DDR4 memory at 2400MHz with CL17 latency. It uses the standard 260-pin SO-DIMM form factor and operates at 1.2V. The kit is validated as a direct replacement for NCR part numbers 006-8626889, 1925-K006, 497-0531032 and 7772-K134.
Running at the JEDEC-defined 1.2V, the unbuffered non-ECC DRAM draws minimal power inside laptops, all-in-ones and NAS units. No heat spreader is fitted, so the module relies on the host chassis airflow. Backward compatibility with 2133MHz platforms allows installation in older slots without configuration changes.
The jump is worthwhile when a system ships with 4GB total or runs at 2133MHz, as the extra capacity and higher data rate improve multitasking and large-file handling. It is not suited for buyers who need ECC error correction, registered buffering or capacities above 8GB per slot.
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, open the memory door, align the notch on the 260-pin module with the slot key, insert at an angle and press down until both retention clips click; the step many skip is pressing firmly enough to engage both clips fully.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so it is designed to last the system's lifetime unless a capacity upgrade is desired.
The CAS latency of 17 cycles at 2400 MHz sets the timing floor; bandwidth and latency remain fixed at JEDEC PC4-19200 specifications during continuous operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?