BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
OWC
8GB DDR4 2400 CL17 SODIMM module upgrades compatible NCR laptops, all-in-ones and NAS systems with 1.2V non-ECC memory
This OWC module delivers 8GB of DDR4 memory at 2400MHz with CL17 latency. It uses the standard 260-pin SO-DIMM form factor and operates at 1.2V. The kit is validated as a direct replacement for NCR part numbers 006-8626889, 1925-K006, 497-0531032 and 7772-K134.
Running at the JEDEC-defined 1.2V, the unbuffered non-ECC DRAM draws minimal power inside laptops, all-in-ones and NAS units. No heat spreader is fitted, so the module relies on the host chassis airflow. Backward compatibility with 2133MHz platforms allows installation in older slots without configuration changes.
The jump is worthwhile when a system ships with 4GB total or runs at 2133MHz, as the extra capacity and higher data rate improve multitasking and large-file handling. It is not suited for buyers who need ECC error correction, registered buffering or capacities above 8GB per slot.
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, open the memory door, align the notch on the 260-pin module with the slot key, insert at an angle and press down until both retention clips click; the step many skip is pressing firmly enough to engage both clips fully.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so it is designed to last the system's lifetime unless a capacity upgrade is desired.
The CAS latency of 17 cycles at 2400 MHz sets the timing floor; bandwidth and latency remain fixed at JEDEC PC4-19200 specifications during continuous operation.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?