BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
8GB DDR4 2400 CL17 SODIMM module upgrades compatible NCR laptops, all-in-ones and NAS systems with 1.2V non-ECC memory
This OWC module delivers 8GB of DDR4 memory at 2400MHz with CL17 latency. It uses the standard 260-pin SO-DIMM form factor and operates at 1.2V. The kit is validated as a direct replacement for NCR part numbers 006-8626889, 1925-K006, 497-0531032 and 7772-K134.
Running at the JEDEC-defined 1.2V, the unbuffered non-ECC DRAM draws minimal power inside laptops, all-in-ones and NAS units. No heat spreader is fitted, so the module relies on the host chassis airflow. Backward compatibility with 2133MHz platforms allows installation in older slots without configuration changes.
The jump is worthwhile when a system ships with 4GB total or runs at 2133MHz, as the extra capacity and higher data rate improve multitasking and large-file handling. It is not suited for buyers who need ECC error correction, registered buffering or capacities above 8GB per slot.
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, open the memory door, align the notch on the 260-pin module with the slot key, insert at an angle and press down until both retention clips click; the step many skip is pressing firmly enough to engage both clips fully.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so it is designed to last the system's lifetime unless a capacity upgrade is desired.
The CAS latency of 17 cycles at 2400 MHz sets the timing floor; bandwidth and latency remain fixed at JEDEC PC4-19200 specifications during continuous operation.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?