Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Brass G 1/4in male-to-female extension coupler, 50mm body, coated finish

PrimoChill

PrimoChill Male to Female G 1/4in 50mm SX Extension Coupler diy cooling

SKU CH-EJW7-GZEKY

A coated-brass G 1/4in male-to-female extension coupler adds 50 mm of clearance for custom water-cooling loops

  • TypeCPU Block

Option Silver Nickel

Sjá 9 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Adds 50 mm reach for tight routing
  • Male-to-female G 1/4 in threads connect directly
  • 55 mm overall height fits confined loops
  • Coated brass body resists corrosion
  • Includes installed O-ring for leak-free seal

Extension coupler for tight clearances

This PrimoChill male-to-female G 1/4in extension coupler adds 50 millimetres of reach so a fitting can clear obstacles in a custom loop. It suits builders who need a little extra length without adding another angled adapter. The coated brass body resists corrosion in mixed-metal systems. Buyers who need a shorter or longer spacer cannot use this fixed-length part.

Thermals noise and power in normal use

The passive brass coupler adds no heat, noise or electrical draw to the loop. Fluid simply passes through the 55 millimetre overall length, so pump performance and coolant temperatures stay unchanged. No fan curves or power phases are involved because the part contains no active components. Installers who want active cooling or temperature sensors must look elsewhere.

Bundled o-ring and finish notes

One installed o-ring on the male thread seals the joint without separate PTFE tape. The Candy SX coating tone varies between knurled and smooth surfaces, so matching adjacent fittings may show a shade difference. No tools, clamps or software are included in the package. Users who prefer a different sealing method or a uniform colour across all fittings will need additional parts.

Helstu kostir

  • Adds 50 mm reach for tight routing
  • Male-to-female G 1/4 in threads connect directly
  • 55 mm overall height fits confined loops
  • Coated brass body resists corrosion
  • Includes installed O-ring for leak-free seal

Tæknilýsing

TypeCPU Block

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 50mm SX extension coupler without cross-threading the G 1/4in threads?

Hand-tighten the male end into the component first, then thread the female side onto your fitting; the pre-installed O-ring on the male thread seals without tools, so stop when resistance firms up.

Will the coated brass coupler need the O-ring replaced or the finish refreshed over time?

The installed O-ring on the male side is the only wear item; coated brass resists corrosion, so no refinishing is required unless physical damage occurs.

At 55mm overall height, when does clearance become the limiting factor in a tight loop?

The 55mm stack height (including threads) is the first constraint — measure between components before ordering to ensure the coupler fits without forcing adjacent fittings.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.