我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Brass G 1/4in male-to-female extension coupler, 50mm body, coated finish

PrimoChill

PrimoChill Male to Female G 1/4in 50mm SX Extension Coupler diy cooling

SKU CH-EJW7-GZEKY

A coated-brass G 1/4in male-to-female extension coupler adds 50 mm of clearance for custom water-cooling loops

  • TypeCPU Block

Option Silver Nickel

顯示另外 9 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Adds 50 mm reach for tight routing
  • Male-to-female G 1/4 in threads connect directly
  • 55 mm overall height fits confined loops
  • Coated brass body resists corrosion
  • Includes installed O-ring for leak-free seal

Extension coupler for tight clearances

This PrimoChill male-to-female G 1/4in extension coupler adds 50 millimetres of reach so a fitting can clear obstacles in a custom loop. It suits builders who need a little extra length without adding another angled adapter. The coated brass body resists corrosion in mixed-metal systems. Buyers who need a shorter or longer spacer cannot use this fixed-length part.

Thermals noise and power in normal use

The passive brass coupler adds no heat, noise or electrical draw to the loop. Fluid simply passes through the 55 millimetre overall length, so pump performance and coolant temperatures stay unchanged. No fan curves or power phases are involved because the part contains no active components. Installers who want active cooling or temperature sensors must look elsewhere.

Bundled o-ring and finish notes

One installed o-ring on the male thread seals the joint without separate PTFE tape. The Candy SX coating tone varies between knurled and smooth surfaces, so matching adjacent fittings may show a shade difference. No tools, clamps or software are included in the package. Users who prefer a different sealing method or a uniform colour across all fittings will need additional parts.

商品特色

  • Adds 50 mm reach for tight routing
  • Male-to-female G 1/4 in threads connect directly
  • 55 mm overall height fits confined loops
  • Coated brass body resists corrosion
  • Includes installed O-ring for leak-free seal

商品規格

TypeCPU Block

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 50mm SX extension coupler without cross-threading the G 1/4in threads?

Hand-tighten the male end into the component first, then thread the female side onto your fitting; the pre-installed O-ring on the male thread seals without tools, so stop when resistance firms up.

Will the coated brass coupler need the O-ring replaced or the finish refreshed over time?

The installed O-ring on the male side is the only wear item; coated brass resists corrosion, so no refinishing is required unless physical damage occurs.

At 55mm overall height, when does clearance become the limiting factor in a tight loop?

The 55mm stack height (including threads) is the first constraint — measure between components before ordering to ensure the coupler fits without forcing adjacent fittings.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。