Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2400MHz ECC Unbuffered UDIMM 2Rx8 CL17 1.2V 288-Pin Server Memory

SKU CH-FD4S-597PD

16 GB dual-rank ECC DDR4-2400 UDIMM with CL17 latency and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with single-bit error correction
  • Supermicro certified module ensures validated compatibility with qualified platforms
  • Micron DDR4 chipset delivers tested reliability at 2400 MT/s
  • Dual-rank 2Rx8 organisation maximises density in a single 16 GB UDIMM
  • Standard 1.2 V DDR4 voltage keeps power draw low

Certified Supermicro DDR4 ECC UDIMM

This 16 GB DDR4 2400 MHz module carries Supermicro certification and uses Micron chips. It is built for servers and workstations that require ECC unbuffered memory. The dual-rank 2Rx8 organisation supports higher density per slot.

288-pin UDIMM with standard 1.2 V operation

The unbuffered DIMM fits standard DDR4 UDIMM sockets and runs at the JEDEC 1.20 V level. ECC circuitry detects and corrects single-bit errors, helping maintain data integrity in always-on environments. CL17 latency and PC4-19200 bandwidth suit typical server workloads.

Verify your platform accepts DDR4 2400 ECC

Check the motherboard or system manual for supported speeds, ranks, and maximum capacity per slot. This module will not work in boards limited to registered DIMMs, non-ECC memory, or a different DDR generation.

Punti di forza

  • ECC protection guards data integrity with single-bit error correction
  • Supermicro certified module ensures validated compatibility with qualified platforms
  • Micron DDR4 chipset delivers tested reliability at 2400 MT/s
  • Dual-rank 2Rx8 organisation maximises density in a single 16 GB UDIMM
  • Standard 1.2 V DDR4 voltage keeps power draw low

Caratteristiche tecniche

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL02-EU24
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL02-EU24 (MTA18ASF2G72AZ-2G3B1)

Domande su questo articolo

Does the DDR4 2400 PC4-19200 rating cap the module at 2400 MHz even if the board supports faster speeds?

Yes, the module runs at 2400 MHz (PC4-19200) as its rated maximum; a faster board will simply down-clock to this speed.

Will the 288-pin ECC UDIMM fit a standard server DIMM slot without extra brackets?

The 288-pin ECC UDIMM form factor matches standard DDR4 server DIMM slots; no adapters or brackets are required.

Is there a specific slot population rule for the 2Rx8 dual-rank modules on a Supermicro board?

Install the modules in the slots recommended by the motherboard manual for dual-rank UDIMMs; the common mistake is mixing ranks in the same channel.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.