Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

A-Tech

A-Tech 16GB DDR4 2400MHz ECC Unbuffered UDIMM 2Rx8 CL17 1.2V 288-Pin Server Memory

SKU CH-FD4S-597PD

16 GB dual-rank ECC DDR4-2400 UDIMM with CL17 latency and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with single-bit error correction
  • Supermicro certified module ensures validated compatibility with qualified platforms
  • Micron DDR4 chipset delivers tested reliability at 2400 MT/s
  • Dual-rank 2Rx8 organisation maximises density in a single 16 GB UDIMM
  • Standard 1.2 V DDR4 voltage keeps power draw low

Certified Supermicro DDR4 ECC UDIMM

This 16 GB DDR4 2400 MHz module carries Supermicro certification and uses Micron chips. It is built for servers and workstations that require ECC unbuffered memory. The dual-rank 2Rx8 organisation supports higher density per slot.

288-pin UDIMM with standard 1.2 V operation

The unbuffered DIMM fits standard DDR4 UDIMM sockets and runs at the JEDEC 1.20 V level. ECC circuitry detects and corrects single-bit errors, helping maintain data integrity in always-on environments. CL17 latency and PC4-19200 bandwidth suit typical server workloads.

Verify your platform accepts DDR4 2400 ECC

Check the motherboard or system manual for supported speeds, ranks, and maximum capacity per slot. This module will not work in boards limited to registered DIMMs, non-ECC memory, or a different DDR generation.

Přednosti

  • ECC protection guards data integrity with single-bit error correction
  • Supermicro certified module ensures validated compatibility with qualified platforms
  • Micron DDR4 chipset delivers tested reliability at 2400 MT/s
  • Dual-rank 2Rx8 organisation maximises density in a single 16 GB UDIMM
  • Standard 1.2 V DDR4 voltage keeps power draw low

Specifikace

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL02-EU24
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL02-EU24 (MTA18ASF2G72AZ-2G3B1)

Otázky k tomuto produktu

Does the DDR4 2400 PC4-19200 rating cap the module at 2400 MHz even if the board supports faster speeds?

Yes, the module runs at 2400 MHz (PC4-19200) as its rated maximum; a faster board will simply down-clock to this speed.

Will the 288-pin ECC UDIMM fit a standard server DIMM slot without extra brackets?

The 288-pin ECC UDIMM form factor matches standard DDR4 server DIMM slots; no adapters or brackets are required.

Is there a specific slot population rule for the 2Rx8 dual-rank modules on a Supermicro board?

Install the modules in the slots recommended by the motherboard manual for dual-rank UDIMMs; the common mistake is mixing ranks in the same channel.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.