Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

A-Tech

A-Tech 16GB DDR5 4800 ECC UDIMM 1Rx8 server RAM

SKU CH-Y7C0-J4377

16GB DDR5-4800 ECC UDIMM server memory module with 1Rx8 rank and 1.10V operation

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 16GB DDR5 4800MHz boosts server throughput with PC5-38400 bandwidth
  • ECC protection safeguards data integrity for mission-critical workloads
  • 1Rx8 single-rank design optimises memory controller efficiency
  • 10V standard voltage reduces power draw per module
  • 288-pin UDIMM fits compatible DDR5 server platforms

16GB DDR5 4800 ECC UDIMM Server RAM

This 16GB DDR5 module runs at 4800MHz with CAS latency 40 and 1.10V operation. It uses a 288-pin unbuffered DIMM layout with 1Rx8 organisation and on-die ECC for data integrity in server workloads.

Suits servers needing single-rank ECC UDIMM upgrades

Not suited for platforms that require registered or load-reduced DIMMs, nor for consumer boards lacking DDR5 ECC UDIMM support. Buyers needing higher density per slot or registered signalling should look elsewhere.

Installs like any standard 288-pin DDR5 UDIMM

Align the notch, press firmly until the retention clips click, and follow the system manual for channel population rules. Common issues arise when mixing ranks or using non-ECC slots that disable error correction.

Punti di forza

  • 16GB DDR5 4800MHz boosts server throughput with PC5-38400 bandwidth
  • ECC protection safeguards data integrity for mission-critical workloads
  • 1Rx8 single-rank design optimises memory controller efficiency
  • 10V standard voltage reduces power draw per module
  • 288-pin UDIMM fits compatible DDR5 server platforms

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for Kingston KTH-PL548E-16G
ModelA-Tech 16GB DDR5-4800 ECC UDIMM Server RAM Module
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Domande su questo articolo

Will this 288-pin DDR5 4800 module work in my current motherboard?

This module requires a motherboard with a 288-pin DDR5 DIMM slot that supports DDR5 4800 speed, ECC UDIMM, and 1.10 V operation.

Can I add this 1Rx8 ECC stick alongside my existing DDR5 non-ECC memory?

Mixing ECC and non-ECC modules is not supported; the system will either disable ECC or fail to boot, so all slots should use ECC UDIMMs.

How do I verify the CAS latency 40 and 4800 MT/s are active after installation?

Enter the BIOS or use a tool such as CPU-Z to confirm the memory runs at DDR5 4800 with CL40 timings and shows ECC enabled.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.