We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR5 4800 ECC UDIMM 1Rx8 server RAM

SKU CH-Y7C0-J4377

16GB DDR5-4800 ECC UDIMM server memory module with 1Rx8 rank and 1.10V operation

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 16GB DDR5 4800MHz boosts server throughput with PC5-38400 bandwidth
  • ECC protection safeguards data integrity for mission-critical workloads
  • 1Rx8 single-rank design optimises memory controller efficiency
  • 10V standard voltage reduces power draw per module
  • 288-pin UDIMM fits compatible DDR5 server platforms

16GB DDR5 4800 ECC UDIMM Server RAM

This 16GB DDR5 module runs at 4800MHz with CAS latency 40 and 1.10V operation. It uses a 288-pin unbuffered DIMM layout with 1Rx8 organisation and on-die ECC for data integrity in server workloads.

Suits servers needing single-rank ECC UDIMM upgrades

Not suited for platforms that require registered or load-reduced DIMMs, nor for consumer boards lacking DDR5 ECC UDIMM support. Buyers needing higher density per slot or registered signalling should look elsewhere.

Installs like any standard 288-pin DDR5 UDIMM

Align the notch, press firmly until the retention clips click, and follow the system manual for channel population rules. Common issues arise when mixing ranks or using non-ECC slots that disable error correction.

Highlights

  • 16GB DDR5 4800MHz boosts server throughput with PC5-38400 bandwidth
  • ECC protection safeguards data integrity for mission-critical workloads
  • 1Rx8 single-rank design optimises memory controller efficiency
  • 10V standard voltage reduces power draw per module
  • 288-pin UDIMM fits compatible DDR5 server platforms

Specifications

BrandA-Tech
SeriesCompatible Replacement for Kingston KTH-PL548E-16G
ModelA-Tech 16GB DDR5-4800 ECC UDIMM Server RAM Module
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Questions about this item

Will this 288-pin DDR5 4800 module work in my current motherboard?

This module requires a motherboard with a 288-pin DDR5 DIMM slot that supports DDR5 4800 speed, ECC UDIMM, and 1.10 V operation.

Can I add this 1Rx8 ECC stick alongside my existing DDR5 non-ECC memory?

Mixing ECC and non-ECC modules is not supported; the system will either disable ECC or fail to boot, so all slots should use ECC UDIMMs.

How do I verify the CAS latency 40 and 4800 MT/s are active after installation?

Enter the BIOS or use a tool such as CPU-Z to confirm the memory runs at DDR5 4800 with CL40 timings and shows ECC enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.