Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 240-pin DDR3L UDIMM with black memory chips and a product label

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V Samsung M391B5273CH0-YK0 M391B5273DH0-YK0 Server Memory

SKU CH-G8V7-FTFXQ

4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V module replaces Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 server memory

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption in server workloads
  • DDR3L 1600 MHz speed delivers responsive multitasking performance
  • Low 1.35V voltage reduces power draw and heat output
  • 240-pin UDIMM form factor fits compatible server motherboards
  • Direct replacement for Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 modules

4GB DDR3L 1600 ECC UDIMM

This 4GB DDR3L 1600 ECC UDIMM module operates at 1.35V with CL11 latency and a 2Rx8 organisation. It is built for servers and workstations that require error-correcting unbuffered memory in the 240-pin DIMM form factor. The part replaces Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 modules. Each stick is tested for reliability before shipping.

Suits systems needing low-voltage ECC unbuffered

Administrators upgrading or repairing servers that specify DDR3L 1600 ECC UDIMM memory will find this module a direct match. It is not suitable for platforms that require registered or load-reduced DIMMs, for boards limited to standard 1.5V DDR3, or for consumer desktops that cannot use ECC memory. Buyers needing larger single-module capacities should verify their system's maximum supported density first.

1.35V DDR3L voltage decides compatibility

The 1.35V operating voltage is the critical specification; systems designed only for 1.5V DDR3 may not support this low-voltage module. Confirm the motherboard or server documentation lists DDR3L 1600 (PC3L-12800) ECC UDIMM support before purchase. The 2Rx8 rank structure and CL11 timing must also align with the platform's memory controller requirements.

Punti di forza

  • ECC protection prevents data corruption in server workloads
  • DDR3L 1600 MHz speed delivers responsive multitasking performance
  • Low 1.35V voltage reduces power draw and heat output
  • 240-pin UDIMM form factor fits compatible server motherboards
  • Direct replacement for Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 modules

Caratteristiche tecniche

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Domande su questo articolo

What motherboard slot does this 240-pin DDR3L UDIMM require?

This module fits a standard 240-pin DDR3 DIMM socket that accepts 1.35 V DDR3L memory.

Will this ECC UDIMM run in a system that currently uses non-ECC DDR3 1600 sticks?

The board must support ECC UDIMM operation; mixing ECC and non-ECC modules is not recommended and may prevent the ECC feature from functioning.

How can I confirm the module is detected at the correct 1600 MHz speed after installation?

Check the BIOS memory information or use a tool such as CPU-Z to verify the module reports DDR3-1600 (PC3L-12800) at CL11.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.