SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00505148BTC
재고 있음
A-Tech
A-Tech 4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V Samsung M391B5273CH0-YK0 M391B5273DH0-YK0 Server Memory
4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V module replaces Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 server memory
- Capacity4GB
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- Buffered/RegisteredUnbuffered
- ECC protection prevents data corruption in server workloads
- DDR3L 1600 MHz speed delivers responsive multitasking performance
- Low 1.35V voltage reduces power draw and heat output
- 240-pin UDIMM form factor fits compatible server motherboards
- Direct replacement for Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 modules
4GB DDR3L 1600 ECC UDIMM
This 4GB DDR3L 1600 ECC UDIMM module operates at 1.35V with CL11 latency and a 2Rx8 organisation. It is built for servers and workstations that require error-correcting unbuffered memory in the 240-pin DIMM form factor. The part replaces Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 modules. Each stick is tested for reliability before shipping.
Suits systems needing low-voltage ECC unbuffered
Administrators upgrading or repairing servers that specify DDR3L 1600 ECC UDIMM memory will find this module a direct match. It is not suitable for platforms that require registered or load-reduced DIMMs, for boards limited to standard 1.5V DDR3, or for consumer desktops that cannot use ECC memory. Buyers needing larger single-module capacities should verify their system's maximum supported density first.
1.35V DDR3L voltage decides compatibility
The 1.35V operating voltage is the critical specification; systems designed only for 1.5V DDR3 may not support this low-voltage module. Confirm the motherboard or server documentation lists DDR3L 1600 (PC3L-12800) ECC UDIMM support before purchase. The 2Rx8 rank structure and CL11 timing must also align with the platform's memory controller requirements.
주요 특징
- ECC protection prevents data corruption in server workloads
- DDR3L 1600 MHz speed delivers responsive multitasking performance
- Low 1.35V voltage reduces power draw and heat output
- 240-pin UDIMM form factor fits compatible server motherboards
- Direct replacement for Samsung M391B5273CH0-YK0 and M391B5273DH0-YK0 modules
사양
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
이 상품에 대한 질문
What motherboard slot does this 240-pin DDR3L UDIMM require?
This module fits a standard 240-pin DDR3 DIMM socket that accepts 1.35 V DDR3L memory.
Will this ECC UDIMM run in a system that currently uses non-ECC DDR3 1600 sticks?
The board must support ECC UDIMM operation; mixing ECC and non-ECC modules is not recommended and may prevent the ECC feature from functioning.
How can I confirm the module is detected at the correct 1600 MHz speed after installation?
Check the BIOS memory information or use a tool such as CPU-Z to verify the module reports DDR3-1600 (PC3L-12800) at CL11.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
