Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2666 ECC UDIMM 1Rx8 Server RAM

SKU CH-NCD0-4VBV5

An 8 GB DDR4 2666 MHz ECC UDIMM module with CL19 latency and 1.2 V operation for server or workstation memory upgrades

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds headroom for virtualization workloads
  • DDR4 2666MHz speed accelerates data throughput for databases
  • ECC UDIMM design detects and corrects single-bit errors
  • 20V operation reduces power draw in dense racks
  • 288-pin DIMM fits standard server motherboard slots

8GB DDR4 2666 ECC UDIMM for servers

This 8GB DDR4 2666 ECC UDIMM module is built for servers and workstations that require error-correcting memory. It runs at 1.2V with a CL19 latency and uses a single-rank 1Rx8 organisation on a 288-pin DIMM. The stick is a direct replacement for Dell part numbers A9845650, SNPD715XC/8G and AA335287.

Replaces non-ECC or slower DDR4 DIMMs

Swapping standard unbuffered non-ECC memory for this ECC UDIMM adds single-bit error correction without changing voltage or form factor. The upgrade is worthwhile when the platform supports ECC UDIMM and the workload demands data integrity over raw bandwidth. Systems limited to registered DIMMs cannot use this module.

Suits Dell servers and compatible workstations

Administrators maintaining Dell platforms that specify the listed part numbers will find a drop-in match. Builders whose motherboards require registered RDIMMs, need higher capacities per slot, or run consumer chipsets without ECC support should look at other memory types.

Punti di forza

  • 8GB capacity adds headroom for virtualization workloads
  • DDR4 2666MHz speed accelerates data throughput for databases
  • ECC UDIMM design detects and corrects single-bit errors
  • 20V operation reduces power draw in dense racks
  • 288-pin DIMM fits standard server motherboard slots

Caratteristiche tecniche

BrandA-Tech
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Domande su questo articolo

Will this 288-pin DDR4 DIMM fit my server's standard UDIMM slots?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor designed for unbuffered ECC UDIMM slots in compatible servers and workstations.

What is the correct way to seat this 1Rx8 ECC UDIMM so the system recognises the full 8GB?

Align the notch on the module with the slot key, press firmly straight down until both side clips click into place, and verify the 2666 MHz speed in BIOS after boot.

Does the 1.20V DDR4 standard voltage mean I never need to adjust BIOS settings for this RAM?

The module operates at the standard 1.20V DDR4 voltage, so most systems will configure it automatically at 2666 MHz CL19 without manual voltage changes.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.