Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2666 ECC UDIMM 1Rx8 Server RAM

SKU CH-NCD0-4VBV5

An 8 GB DDR4 2666 MHz ECC UDIMM module with CL19 latency and 1.2 V operation for server or workstation memory upgrades

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds headroom for virtualization workloads
  • DDR4 2666MHz speed accelerates data throughput for databases
  • ECC UDIMM design detects and corrects single-bit errors
  • 20V operation reduces power draw in dense racks
  • 288-pin DIMM fits standard server motherboard slots

8GB DDR4 2666 ECC UDIMM for servers

This 8GB DDR4 2666 ECC UDIMM module is built for servers and workstations that require error-correcting memory. It runs at 1.2V with a CL19 latency and uses a single-rank 1Rx8 organisation on a 288-pin DIMM. The stick is a direct replacement for Dell part numbers A9845650, SNPD715XC/8G and AA335287.

Replaces non-ECC or slower DDR4 DIMMs

Swapping standard unbuffered non-ECC memory for this ECC UDIMM adds single-bit error correction without changing voltage or form factor. The upgrade is worthwhile when the platform supports ECC UDIMM and the workload demands data integrity over raw bandwidth. Systems limited to registered DIMMs cannot use this module.

Suits Dell servers and compatible workstations

Administrators maintaining Dell platforms that specify the listed part numbers will find a drop-in match. Builders whose motherboards require registered RDIMMs, need higher capacities per slot, or run consumer chipsets without ECC support should look at other memory types.

Přednosti

  • 8GB capacity adds headroom for virtualization workloads
  • DDR4 2666MHz speed accelerates data throughput for databases
  • ECC UDIMM design detects and corrects single-bit errors
  • 20V operation reduces power draw in dense racks
  • 288-pin DIMM fits standard server motherboard slots

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Will this 288-pin DDR4 DIMM fit my server's standard UDIMM slots?

Yes, the module uses the standard 288-pin DDR4 DIMM form factor designed for unbuffered ECC UDIMM slots in compatible servers and workstations.

What is the correct way to seat this 1Rx8 ECC UDIMM so the system recognises the full 8GB?

Align the notch on the module with the slot key, press firmly straight down until both side clips click into place, and verify the 2666 MHz speed in BIOS after boot.

Does the 1.20V DDR4 standard voltage mean I never need to adjust BIOS settings for this RAM?

The module operates at the standard 1.20V DDR4 voltage, so most systems will configure it automatically at 2666 MHz CL19 without manual voltage changes.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.