NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
Supermicro-certified 8 GB DDR3 1333 MHz ECC registered DIMM with dual-rank Hynix chips and 240-pin form factor
This module is built for servers and workstations that require registered ECC memory. It targets system builders and IT professionals who need validated compatibility with Supermicro platforms. The 8GB capacity suits memory upgrades or replacements in multi-slot configurations.
Operating at the standard DDR3 voltage of 1.50V, the module runs within typical server thermal envelopes. Registered buffering adds minimal electrical load to the memory controller. Passive cooling in a chassis with adequate airflow is sufficient for normal operation.
The dual-rank 2Rx4 organisation and CL9 latency at 1333MHz define the module's electrical behaviour. Only systems that support DDR3 registered ECC DIMMs at this speed can use it. Buyers needing unbuffered non-ECC memory or a different DDR generation cannot install this part.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR380L-HL01-ER13 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Supermicro Certified MEM-DR380L-HL01-ER13 (HMT31GR7AFR4C-H9) |
Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module registers at 1333 MHz with ECC active.
No scheduled maintenance is needed; keep air vents clear so the 1.50V modules stay cool, and replace the stick only if system logs report uncorrectable ECC errors or the server fails to POST with the module seated.
The 1333 MHz data rate and CL9 latency set the throughput ceiling, so sustained workloads will hit bandwidth limits before the 1.50V power envelope becomes a constraint.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?