We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 RDIMM module with black memory chips and a white label

A-Tech

A-Tech Supermicro Certified 8GB DDR3 1333MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-Q413-7Q0DT

Supermicro-certified 8 GB DDR3 1333 MHz ECC registered DIMM with dual-rank Hynix chips and 240-pin form factor

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 8GB DDR3 1333MHz ECC RDIMM for data integrity
  • Dual-rank 2Rx4 architecture maximises memory density
  • 5V standard voltage ensures efficient operation
  • Rigorously tested with lifetime warranty backing

Supermicro Certified 8GB DDR3 RDIMM

This module is built for servers and workstations that require registered ECC memory. It targets system builders and IT professionals who need validated compatibility with Supermicro platforms. The 8GB capacity suits memory upgrades or replacements in multi-slot configurations.

Thermals noise and power draw

Operating at the standard DDR3 voltage of 1.50V, the module runs within typical server thermal envelopes. Registered buffering adds minimal electrical load to the memory controller. Passive cooling in a chassis with adequate airflow is sufficient for normal operation.

ECC Registered 2Rx4 DDR3 1333MHz

The dual-rank 2Rx4 organisation and CL9 latency at 1333MHz define the module's electrical behaviour. Only systems that support DDR3 registered ECC DIMMs at this speed can use it. Buyers needing unbuffered non-ECC memory or a different DDR generation cannot install this part.

Highlights

  • Supermicro certified for guaranteed server compatibility
  • 8GB DDR3 1333MHz ECC RDIMM for data integrity
  • Dual-rank 2Rx4 architecture maximises memory density
  • 5V standard voltage ensures efficient operation
  • Rigorously tested with lifetime warranty backing

Specifications

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR380L-HL01-ER13
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR380L-HL01-ER13 (HMT31GR7AFR4C-H9)

Questions about this item

How do I install the 240-pin DDR3 RDIMM and what step is often missed?

Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module registers at 1333 MHz with ECC active.

What maintenance or replacement will this 8GB DDR3 ECC RDIMM need over time?

No scheduled maintenance is needed; keep air vents clear so the 1.50V modules stay cool, and replace the stick only if system logs report uncorrectable ECC errors or the server fails to POST with the module seated.

What limit appears first when this 1333 MHz registered memory runs under sustained load?

The 1333 MHz data rate and CL9 latency set the throughput ceiling, so sustained workloads will hit bandwidth limits before the 1.50V power envelope becomes a constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.