Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Flat orange flex cable one meter long sixteen millimetres wide point two millimetres thick

Adafruit

Adafruit Flex Cable for Raspberry Pi Camera 1 meter engineering development tool

SKU CH-SXSE-KKP8N

A 1 meter replacement flex cable for Raspberry Pi Camera boards, extending the stock 150mm length

  • TypeEngineering Development Tools
  • Reach camera positions up to 1 meter away with this extended flex cable
  • Replace the standard 150mm ribbon for flexible Pi Camera mounting
  • Slim 16mm wide by 0.2mm thick profile fits tight enclosures easily
  • Lightweight 7.5g cable adds minimal mass to moving or airborne projects
  • Raspberry Pi and Camera Board not included — cable only purchase

Extension cable for Raspberry Pi cameras

This one-metre flex cable replaces the stock 150 mm ribbon on classic or NoIR Raspberry Pi camera boards. It measures 1 metre by 16 mm by 0.2 mm and weighs 7.5 g. The Raspberry Pi and camera board are not included in the package.

Installing the replacement ribbon

Open the connector on the Pi carefully and slide the new cable in; the process is straightforward but requires gentle handling to avoid damaging the contacts. At 3.3 ft the longer run can pick up noise in electrically harsh environments, which may result in corrupted images.

Signal integrity limits of the CSI interface

The CSI protocol used by the camera is not designed for one-metre lengths, so image quality can degrade in noisy surroundings. Users who need reliable capture over longer distances should consider alternative connection methods rather than extending the flex cable further.

Punti di forza

  • Reach camera positions up to 1 meter away with this extended flex cable
  • Replace the standard 150mm ribbon for flexible Pi Camera mounting
  • Slim 16mm wide by 0.2mm thick profile fits tight enclosures easily
  • Lightweight 7.5g cable adds minimal mass to moving or airborne projects
  • Raspberry Pi and Camera Board not included — cable only purchase

Caratteristiche tecniche

TypeEngineering Development Tools

Domande su questo articolo

How can I verify the 1 meter flex cable is seated correctly after installation?

After sliding the cable into the Pi's connector, check that the camera initialises without errors and captures stable images; if frames appear corrupted in a noisy environment, try a shorter cable.

What does the package contain and what must I source separately?

The box holds one 1 meter flex cable measuring 16 mm wide and 0.2 mm thick; you must supply your own Raspberry Pi board and Camera module.

Which length should I choose for a standard Pi Camera setup?

The 1 meter cable replaces the stock 150 mm flex and works with classic or NoIR cameras on Model B or B+, but 3.3 ft may introduce corruption in electrically noisy settings.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.