Bestoss
Bestoss GM528 1TB NVMe internal SSD graphene-copper cooling
PCIe 4.0 NVMe SSD with graphene-copper cooling delivers up to 5000 MB/s read and 4000 MB/s write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
Capacity 1TB
- 1TB
- 2TB
- Up to 5000 MB/s sequential read via PCIe 4.0
- Up to 4000 MB/s sequential write for fast transfers
- Graphene-copper cooling keeps temperatures low under load
- DRAM-less design uses HMB and SLC caching for efficiency
- M.2 2280 form factor fits laptops and desktops
GM528 1TB NVMe internal SSD
The GM528 is a 1 TB NVMe drive built on PCIe 4.0 x4 and 3D NAND. It targets office users, students, gamers and video editors who need fast boot times and responsive multitasking. The drive uses HMB instead of a DRAM cache.
Fits M.2 2280 slots in desktops.
The M.2 2280 form factor slides into any compatible slot. It works with PCIe 3.0 and 4.0 hosts, so older platforms still function at reduced speed. No DRAM cache means lower power draw and simpler thermal management. The graphene-copper layer spreads heat without extra bulk.
Sustains up to 5000 MB/s read
Sequential speeds of 5000 MB/s read and 4000 MB/s write are available when the host provides PCIe 4.0 x4. Dynamic SLC caching helps maintain throughput during heavy writes. On PCIe 3.0 the drive still operates but cannot reach the peak figures. The cooling solution keeps temperatures steady during extended gaming or 8 K streaming sessions.
Punti di forza
- Up to 5000 MB/s sequential read via PCIe 4.0
- Up to 4000 MB/s sequential write for fast transfers
- Graphene-copper cooling keeps temperatures low under load
- DRAM-less design uses HMB and SLC caching for efficiency
- M.2 2280 form factor fits laptops and desktops
Caratteristiche tecniche
| Brand | Bestoss |
|---|---|
| Series | GM series |
| Model | GM528 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 5000 MBps |
| Max Sequential Write | Up to 4000 MBps |
Altre versioni di questo modello
altri 1 nella stessa gamma
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Domande su questo articolo
Will the GM528 throttle during long 5000 MB/s reads?
The graphene-copper cooler is built to keep temperatures low so the drive can sustain near-peak read speeds through extended sessions.
How hot or loud does the drive get under all-day workloads?
The passive graphene-copper heatspreader adds no noise and is designed to dissipate heat without active cooling.
What motherboard slot do I need for this M.2 2280 NVMe SSD?
A PCIe 4.0 x4 M.2 slot delivers the rated 5000 MB/s; a PCIe 3.0 slot works but limits throughput.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM




