Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

DELL

DELL 529FG 4TB 7.2K 6Gb/s 3.5in SAS internal hard drive

SKU CH-T90X-RTPN9 MPN 529FG

A 4 TB SAS hard drive spinning at 7,200 RPM with a 6 Gb/s interface and included tray

  • 4 TB capacity stores large data sets
  • 7200 RPM spindle speed enables quick file access
  • SAS 6 Gb/s interface provides reliable data throughput
  • 5 inch form factor fits standard drive bays
  • Includes tray for straightforward installation

Capacity and interface

This is a Dell-branded 4 TB 3.5-inch internal hard drive that uses a SAS interface rated at 6 Gb/s and spins at 7200 RPM. It ships with a mounting tray and is built on the Seagate ST4000NM0023 platform.

Who this suits

The drive fits servers or workstations that accept 3.5-inch SAS drives and need high-capacity nearline storage for bulk data, backups or archival workloads. It is not for systems that only provide SATA backplanes or controllers without SAS support.

Deciding specification

The single specification that decides fit is the 6 Gb/s SAS interface; the drive will not operate on SATA-only ports and requires a compatible SAS controller or backplane.

Punti di forza

  • 4 TB capacity stores large data sets
  • 7200 RPM spindle speed enables quick file access
  • SAS 6 Gb/s interface provides reliable data throughput
  • 5 inch form factor fits standard drive bays
  • Includes tray for straightforward installation

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Domande su questo articolo

Does the 3.5in SAS drive fit a standard 3.5in drive bay with the included tray?

The 3.5in form factor matches standard 3.5in bays and the supplied tray secures it with side screws.

What is the correct cable order when connecting the 6Gb/s SAS drive to a RAID controller?

Attach the SAS data cable to the controller port first, then seat the drive power connector before tightening the tray screws.

How often should I check SMART data on this 7200RPM 4TB SAS drive?

Schedule a SMART scan monthly and replace the drive if reallocated sectors or seek errors start rising.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.