Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver 3.5 inch SATA hard drive with hot-swap tray

DELL

DELL Exos 7E2 1TB 7200 RPM SATA 6.0Gb/s 3.5" Hot Swap internal hard drive

SKU CH-4KTB-2YEC7

A 1 TB 3.5-inch desktop hard drive with a 7200 RPM spindle and SATA 6.0Gb/s interface supporting hot-swap installation

  • InterfaceSATA 6.0Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 6.0Gb/s interface provides high-throughput connectivity
  • 1TB capacity stores large volumes of files
  • 5-inch form factor fits standard desktop drive bays
  • Hot-swap capability enables drive replacement without system shutdown

1TB 7200 RPM SATA drive

This 1 TB hard drive spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It uses a 3.5 inch form factor with hot-swap support for desktop systems. The drive is supplied new and packing may vary between retail and OEM.

Sustained 7200 RPM operation

The spindle maintains 7200 RPM continuously rather than only in short bursts. This steady rotation keeps sequential throughput stable during long writes or backups. Heat output remains consistent under load because the motor speed does not throttle. The SATA 6.0Gb/s link sustains the data rate without protocol overhead changes.

SATA 6.0Gb/s interface ceiling

The SATA 6.0Gb/s interface caps maximum transfer at the bus limit, so the drive cannot exceed that bandwidth. Mechanical latency and the 7200 RPM spindle set the practical floor for random access. Hot-swap capability depends on the host backplane supporting the SATA hot-plug specification. The 3.5 inch form factor requires a matching drive bay or tray.

Punti di forza

  • 7200 RPM spindle speed delivers responsive data access
  • SATA 6.0Gb/s interface provides high-throughput connectivity
  • 1TB capacity stores large volumes of files
  • 5-inch form factor fits standard desktop drive bays
  • Hot-swap capability enables drive replacement without system shutdown

Caratteristiche tecniche

InterfaceSATA 6.0Gb/s
Capacity1TB
RPM7200 RPM
Form Factor3.5"

Domande su questo articolo

How much noise and heat does the 7200 RPM SATA 6.0Gb/s drive produce during continuous operation?

The 7200 RPM spindle generates typical mechanical hard-drive noise and warmth; ensure your case airflow can move air across the 3.5" chassis.

What existing hardware is required for this hot-swap 3.5" SATA drive to function?

You need a 3.5" hot-swap bay or cage with a SATA 6.0Gb/s backplane and matching power connectors.

Will the 1TB SATA 6.0Gb/s drive work alongside an older 3 Gb/s SATA controller?

Yes, the SATA 6.0Gb/s interface negotiates down to 3 Gb/s, so the 1TB drive remains usable on legacy ports.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.