Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 3.5 inch SATA hard drive with hot-swap tray

DELL

DELL Exos 7E2 1TB 7200 RPM SATA 6.0Gb/s 3.5" Hot Swap internal hard drive

SKU CH-4KTB-2YEC7

A 1 TB 3.5-inch desktop hard drive with a 7200 RPM spindle and SATA 6.0Gb/s interface supporting hot-swap installation

  • InterfaceSATA 6.0Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 6.0Gb/s interface provides high-throughput connectivity
  • 1TB capacity stores large volumes of files
  • 5-inch form factor fits standard desktop drive bays
  • Hot-swap capability enables drive replacement without system shutdown

1TB 7200 RPM SATA drive

This 1 TB hard drive spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It uses a 3.5 inch form factor with hot-swap support for desktop systems. The drive is supplied new and packing may vary between retail and OEM.

Sustained 7200 RPM operation

The spindle maintains 7200 RPM continuously rather than only in short bursts. This steady rotation keeps sequential throughput stable during long writes or backups. Heat output remains consistent under load because the motor speed does not throttle. The SATA 6.0Gb/s link sustains the data rate without protocol overhead changes.

SATA 6.0Gb/s interface ceiling

The SATA 6.0Gb/s interface caps maximum transfer at the bus limit, so the drive cannot exceed that bandwidth. Mechanical latency and the 7200 RPM spindle set the practical floor for random access. Hot-swap capability depends on the host backplane supporting the SATA hot-plug specification. The 3.5 inch form factor requires a matching drive bay or tray.

Pluspunten

  • 7200 RPM spindle speed delivers responsive data access
  • SATA 6.0Gb/s interface provides high-throughput connectivity
  • 1TB capacity stores large volumes of files
  • 5-inch form factor fits standard desktop drive bays
  • Hot-swap capability enables drive replacement without system shutdown

Specificaties

InterfaceSATA 6.0Gb/s
Capacity1TB
RPM7200 RPM
Form Factor3.5"

Vragen over dit artikel

How much noise and heat does the 7200 RPM SATA 6.0Gb/s drive produce during continuous operation?

The 7200 RPM spindle generates typical mechanical hard-drive noise and warmth; ensure your case airflow can move air across the 3.5" chassis.

What existing hardware is required for this hot-swap 3.5" SATA drive to function?

You need a 3.5" hot-swap bay or cage with a SATA 6.0Gb/s backplane and matching power connectors.

Will the 1TB SATA 6.0Gb/s drive work alongside an older 3 Gb/s SATA controller?

Yes, the SATA 6.0Gb/s interface negotiates down to 3 Gb/s, so the 1TB drive remains usable on legacy ports.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.