Digifast
Digifast Chevron Black+ 1TB M.2 NVMe RGB internal SSD
1TB M.2 2280 NVMe SSD with RGB lighting, PCIe 3.0 x4 interface, up to 3470 MB/s read and 3000 MB/s write speeds, and 1.8 million hours MTBF
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
- Syncs RGB with motherboard software for unified lighting
- Delivers 3470 MB/s read and 3000 MB/s write speeds
- Offers 1.8 million hours MTBF and 1200 TBW endurance
- Includes heatsink to manage thermals under load
- Fits PCs and laptops via M.2 2280 form factor
Capacity and interface
The Digifast Chevron Black+ is a 1TB internal solid-state drive using the M.2 2280 form factor and a PCI-Express 3.0 x4 connection. It is built for consumers who want faster boot and load times than a SATA drive can provide. The drive includes a heatsink and addressable RGB lighting that synchronises with motherboard control software.
Best fit and alternatives
This model suits desktop or laptop builders who have an M.2 slot wired for PCIe 3.0 x4 and want a 1TB NVMe drive with RGB integration. Users whose motherboards only support SATA-based M.2 modules or who need a 2.5-inch form factor should select a different product. The Phison PS5012-E12/E12C controller and Toshiba BiCS3 3D NAND deliver sequential reads up to 3470 MBps and writes up to 3000 MBps.
Compatibility checks
Verify that your system has a free M.2 2280 slot keyed for PCIe 3.0 x4 NVMe operation and that the motherboard firmware recognises NVMe boot drives. Confirm the heatsink height clears any neighbouring components or expansion cards. Ensure the board’s RGB header and software support the drive’s lighting protocol if colour synchronisation is desired.
Punti di forza
- Syncs RGB with motherboard software for unified lighting
- Delivers 3470 MB/s read and 3000 MB/s write speeds
- Offers 1.8 million hours MTBF and 1200 TBW endurance
- Includes heatsink to manage thermals under load
- Fits PCs and laptops via M.2 2280 form factor
Caratteristiche tecniche
| Brand | Digifast |
|---|---|
| Series | Chevron Black+ |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Controller | Toshiba |
| Max Sequential Read | Up to 3470 MBps |
| Max Sequential Write | Up to 3000 MBps |
| MTBF | 1,800,000 hours |
| HeatSink | with HeatSink |
Domande su questo articolo
Does my motherboard need a PCIe 3.0 x4 M.2 2280 slot for this drive?
Yes, the drive uses a PCI-Express 3.0 x4 interface and the M.2 2280 form factor, so the board must provide that slot.
Will the RGB lighting work if I keep my older motherboard that lacks addressable RGB headers?
The lighting is controlled through existing motherboard software and controllers, so a board without compatible RGB software cannot synchronise the LEDs.
How can I confirm the drive is delivering its rated 3470 MBps read and 3000 MBps write speeds after installation?
Run a benchmark tool such as CrystalDiskMark on the NVMe drive and compare the sequential results to the 3470 MBps read and 3000 MBps write figures.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
