Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black M.2 2280 SSD with integrated heatsink and RGB lighting

Digifast

Digifast Chevron Black+ 1TB M.2 NVMe RGB internal SSD

SKU CH-HTS7-WR441

1TB M.2 2280 NVMe SSD with RGB lighting, PCIe 3.0 x4 interface, up to 3470 MB/s read and 3000 MB/s write speeds, and 1.8 million hours MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4
  • Syncs RGB with motherboard software for unified lighting
  • Delivers 3470 MB/s read and 3000 MB/s write speeds
  • Offers 1.8 million hours MTBF and 1200 TBW endurance
  • Includes heatsink to manage thermals under load
  • Fits PCs and laptops via M.2 2280 form factor

Capacity and interface

The Digifast Chevron Black+ is a 1TB internal solid-state drive using the M.2 2280 form factor and a PCI-Express 3.0 x4 connection. It is built for consumers who want faster boot and load times than a SATA drive can provide. The drive includes a heatsink and addressable RGB lighting that synchronises with motherboard control software.

Best fit and alternatives

This model suits desktop or laptop builders who have an M.2 slot wired for PCIe 3.0 x4 and want a 1TB NVMe drive with RGB integration. Users whose motherboards only support SATA-based M.2 modules or who need a 2.5-inch form factor should select a different product. The Phison PS5012-E12/E12C controller and Toshiba BiCS3 3D NAND deliver sequential reads up to 3470 MBps and writes up to 3000 MBps.

Compatibility checks

Verify that your system has a free M.2 2280 slot keyed for PCIe 3.0 x4 NVMe operation and that the motherboard firmware recognises NVMe boot drives. Confirm the heatsink height clears any neighbouring components or expansion cards. Ensure the board’s RGB header and software support the drive’s lighting protocol if colour synchronisation is desired.

Points forts

  • Syncs RGB with motherboard software for unified lighting
  • Delivers 3470 MB/s read and 3000 MB/s write speeds
  • Offers 1.8 million hours MTBF and 1200 TBW endurance
  • Includes heatsink to manage thermals under load
  • Fits PCs and laptops via M.2 2280 form factor

Caractéristiques

BrandDigifast
SeriesChevron Black+
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ControllerToshiba
Max Sequential ReadUp to 3470 MBps
Max Sequential WriteUp to 3000 MBps
MTBF1,800,000 hours
HeatSinkwith HeatSink

Questions sur cet article

Does my motherboard need a PCIe 3.0 x4 M.2 2280 slot for this drive?

Yes, the drive uses a PCI-Express 3.0 x4 interface and the M.2 2280 form factor, so the board must provide that slot.

Will the RGB lighting work if I keep my older motherboard that lacks addressable RGB headers?

The lighting is controlled through existing motherboard software and controllers, so a board without compatible RGB software cannot synchronise the LEDs.

How can I confirm the drive is delivering its rated 3470 MBps read and 3000 MBps write speeds after installation?

Run a benchmark tool such as CrystalDiskMark on the NVMe drive and compare the sequential results to the 3470 MBps read and 3000 MBps write figures.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.