Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

GIGABYTE

GIGABYTE Z590 GAMING X Intel motherboard

SKU CH-30RQ-QAXND

ATX board for 10th and 11th Gen Intel CPUs with three M.2 slots, six SATA III ports, PCIe 4.0, USB 3.2 Gen2 Type-A and Type-C, and 128 GB DDR4 capacity

  • Supports 10th and 11th generation Intel Core, Pentium and Celeron processors via LGA 1200 socket
  • Dual-channel DDR4 memory up to 128 GB at speeds from 2133 to 3200 MHz
  • Three M.2 slots and six SATA III ports for extensive storage expansion
  • PCIe 4.0 support with one x16, one x4 and two x1 expansion slots
  • 18+1 phase power delivery with 12-pin and 24-pin connectors for stable operation

Z590 ATX board for 10th and 11th Gen Intel CPUs

This motherboard uses the Intel Z590 chipset and an LGA 1200 socket to support 10th and 11th generation Core, Pentium and Celeron processors. It provides four DDR4 DIMM slots for up to 128 GB of dual-channel memory at speeds from 2133 to 3200 MHz. The ATX form factor measures 30.5 by 24.4 cm and fits standard cases.

Straightforward ATX installation with M.2 screw care

The board follows the standard ATX mounting pattern and uses a 24-pin plus 12-pin power arrangement. Install the CPU, secure the cooler, populate the DIMM slots and connect the front-panel headers. The three M.2 slots each need a small standoff screw; dropping or misplacing these screws is the most common issue. Route the six SATA III cables and front-panel USB leads before the graphics card goes in to avoid tight clearances.

18+1 phase VRM sustains heavy multi-core workloads

An 18+1 phase power design feeds the CPU socket, keeping voltage stable during extended all-core boosts from 10th and 11th generation chips. The chipset and VRM heatsinks dissipate heat without active fans, so sustained compile, render or encoding runs stay within thermal limits. PCIe 4.0 on the primary x16 slot and M.2 interfaces maintains full throughput to graphics cards and SSDs throughout long sessions.

Punti di forza

  • Supports 10th and 11th generation Intel Core, Pentium and Celeron processors via LGA 1200 socket
  • Dual-channel DDR4 memory up to 128 GB at speeds from 2133 to 3200 MHz
  • Three M.2 slots and six SATA III ports for extensive storage expansion
  • PCIe 4.0 support with one x16, one x4 and two x1 expansion slots
  • 18+1 phase power delivery with 12-pin and 24-pin connectors for stable operation

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Domande su questo articolo

How can I confirm the board is running at PCIe 4.0 speeds after installing an 11th-generation CPU?

Enter the BIOS and verify the PCIe slot shows Gen 4.0 link width x16 for the primary slot; under Windows, GPU-Z or HWInfo will report the active link speed as 4.0 when a compatible graphics card is seated.

What accessories are included in the box and which common parts must be purchased separately?

The retail package contains the ATX motherboard, I/O shield, SATA cables, M.2 mounting screws and documentation; you must supply an LGA 1200 CPU, DDR4 memory modules, storage drives, power supply and CPU cooler.

Which memory speed should I choose for the best balance of stability and throughput on this Z590 board?

The board officially supports dual-channel DDR4 at 2133, 2400, 2666, 3000 and 3200 MHz; 3200 MHz kits give the highest rated frequency while remaining within the validated range.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.