Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
A rectangular ATX power supply unit in matte black finish with a single cooling fan visible on one side and a grille on the rear

Gulfe

Gulfe ATX Power Supply 5.9" x 3.4" 2.5kg

SKU CH-X7M5-48EED

ATX power supply with reduced depth and 24-pin, SATA and legacy connectors for HP Pavilion desktops

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX reduced depth fits compact cases easily
  • Dual 115/230 V input works worldwide
  • Over-current and over-power protection safeguards components
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • High-efficiency design with 17 ms hold-up time

Replacement ATX Power Supply

This Gulfe ATX power supply is built as a direct replacement for HP Pavilion Media Center M8100Y and P6000 desktop PCs. It delivers standard ATX output rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. The unit is new and weighs 2.5 kg.

Reduced Depth Form Factor

The compact dimensions of 5.9" height by 3.4" width reduce depth to increase compatibility with tighter chassis layouts. It requires an ATX motherboard connector and provides one 24-pin (20+4) connector, one P4 4-pin connector, three SATA 15-pin connectors, two LP4 4-pin connectors and one floppy 4-pin connector. Builders needing additional PCIe power cables or modular cabling cannot use this unit.

Single Fan Cooling with Protection

A single fan handles thermal management while the unit operates on 115/230 V AC input at 47-63 Hz. Safety features include over-current and over-power protection with a rise time under 70 ms and a minimum hold-up time of 17 ms. The supplier notes high efficiency and low ripple and noise during normal operation.

Punti di forza

  • ATX reduced depth fits compact cases easily
  • Dual 115/230 V input works worldwide
  • Over-current and over-power protection safeguards components
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • High-efficiency design with 17 ms hold-up time

Caratteristiche tecniche

BrandGulfe
TypeATX
Fans1
Weight2.5

Domande su questo articolo

What holds the supply back first when it runs flat-out all day?

The 17 ms minimum hold-up time at nominal input is the first hard limit under sustained full load.

How much noise, heat or power draw should I expect once it has been running all day?

One fan cools the unit; it delivers +5 V, −5 V, +12 V1, +12 V2, +3.3 V, −12 V and +5 VSB rails continuously.

Which cables or components must I already have for this supply to work in my HP Pavilion Media Center M8100Y or P6000 desktop?

Your motherboard needs a 24-pin ATX socket and a 4-pin P4 12 V connector; drives use three SATA power plugs, two LP4 plugs and one floppy plug.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.