Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A rectangular ATX power supply unit in matte black finish with a single cooling fan visible on one side and a grille on the rear

Gulfe

Gulfe ATX Power Supply 5.9" x 3.4" 2.5kg

SKU CH-X7M5-48EED

ATX power supply with reduced depth and 24-pin, SATA and legacy connectors for HP Pavilion desktops

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX reduced depth fits compact cases easily
  • Dual 115/230 V input works worldwide
  • Over-current and over-power protection safeguards components
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • High-efficiency design with 17 ms hold-up time

Replacement ATX Power Supply

This Gulfe ATX power supply is built as a direct replacement for HP Pavilion Media Center M8100Y and P6000 desktop PCs. It delivers standard ATX output rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. The unit is new and weighs 2.5 kg.

Reduced Depth Form Factor

The compact dimensions of 5.9" height by 3.4" width reduce depth to increase compatibility with tighter chassis layouts. It requires an ATX motherboard connector and provides one 24-pin (20+4) connector, one P4 4-pin connector, three SATA 15-pin connectors, two LP4 4-pin connectors and one floppy 4-pin connector. Builders needing additional PCIe power cables or modular cabling cannot use this unit.

Single Fan Cooling with Protection

A single fan handles thermal management while the unit operates on 115/230 V AC input at 47-63 Hz. Safety features include over-current and over-power protection with a rise time under 70 ms and a minimum hold-up time of 17 ms. The supplier notes high efficiency and low ripple and noise during normal operation.

Pluspunten

  • ATX reduced depth fits compact cases easily
  • Dual 115/230 V input works worldwide
  • Over-current and over-power protection safeguards components
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • High-efficiency design with 17 ms hold-up time

Specificaties

BrandGulfe
TypeATX
Fans1
Weight2.5

Vragen over dit artikel

What holds the supply back first when it runs flat-out all day?

The 17 ms minimum hold-up time at nominal input is the first hard limit under sustained full load.

How much noise, heat or power draw should I expect once it has been running all day?

One fan cools the unit; it delivers +5 V, −5 V, +12 V1, +12 V2, +3.3 V, −12 V and +5 VSB rails continuously.

Which cables or components must I already have for this supply to work in my HP Pavilion Media Center M8100Y or P6000 desktop?

Your motherboard needs a 24-pin ATX socket and a 4-pin P4 12 V connector; drives use three SATA power plugs, two LP4 plugs and one floppy plug.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.