Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Standard 3.5 inch SATA hard drive with hot-plug tray, silver metal casing, label visible

HP

HP 601452-002 1TB 7200 RPM 1.5Gbps 3.5 inch hotplug SATA internal hard drive

SKU CH-JRGT-VGN3P

A 1 TB 3.5 inch SATA desktop drive spinning at 7200 RPM with hot-plug support

  • InterfaceSATA 1.5Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • 1TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 1.5Gb/s interface connects to compatible motherboards and controllers
  • 5-inch hot-plug form factor allows drive swaps without system shutdown
  • New condition ensures full manufacturer-rated reliability

HP 601452-002 1TB SATA drive

This HP 601452-002 is a 1TB 3.5 inch internal hard drive built for desktop systems that accept a SATA 1.5Gb/s connection. It spins at 7200 RPM and supports hot-plug installation in compatible bays. The drive suits users who need bulk storage on older platforms limited to the first SATA generation. Buyers requiring the faster throughput of SATA 3Gb/s or 6Gb/s should choose a different model.

Thermals noise and power

Mechanical operation at 7200 RPM produces audible seek noise and measurable heat during sustained reads or writes. Power draw follows typical 3.5 inch hard-drive profiles for the SATA 1.5Gb/s interface. Acoustic output rises under heavy random-access workloads. No active cooling or specialised airflow is specified by the manufacturer.

Build integration

The drive fits a standard 3.5 inch hot-plug bay and connects through a single SATA data cable plus a SATA power connector. Hot-plug capability lets you swap the unit without powering down the host when the chassis and controller support it. The 1.5Gb/s link caps maximum sequential transfer, so the drive will not saturate faster SATA ports. Systems without a 3.5 inch hot-plug bay cannot use this drive as intended.

Punti di forza

  • 1TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 1.5Gb/s interface connects to compatible motherboards and controllers
  • 5-inch hot-plug form factor allows drive swaps without system shutdown
  • New condition ensures full manufacturer-rated reliability

Caratteristiche tecniche

InterfaceSATA 1.5Gb/s
Capacity1TB
RPM7200 RPM

Domande su questo articolo

How do I install the 3.5 inch hot-plug drive into an HP server tray?

Slide the drive into the hot-plug carrier until the connector seats on the backplane, then secure the carrier latch; the SATA 1.5Gb/s interface requires no jumper configuration.

What maintenance or replacement will the 7200 RPM drive need later?

Mechanical drives can develop bad sectors or bearing wear over time; plan to replace the unit if SMART reallocated-sector counts rise or unusual noise appears.

What limit appears first during sustained writes on the 1.5Gb/s SATA link?

The 1.5Gb/s interface caps sustained transfer rates, so throughput plateaus at the link speed before the 7200 RPM platters reach their own sequential ceiling.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.