Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Standard 3.5 inch SATA hard drive with hot-plug tray, silver metal casing, label visible

HP

HP 601452-002 1TB 7200 RPM 1.5Gbps 3.5 inch hotplug SATA internal hard drive

SKU CH-JRGT-VGN3P

A 1 TB 3.5 inch SATA desktop drive spinning at 7200 RPM with hot-plug support

  • InterfaceSATA 1.5Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • 1TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 1.5Gb/s interface connects to compatible motherboards and controllers
  • 5-inch hot-plug form factor allows drive swaps without system shutdown
  • New condition ensures full manufacturer-rated reliability

HP 601452-002 1TB SATA drive

This HP 601452-002 is a 1TB 3.5 inch internal hard drive built for desktop systems that accept a SATA 1.5Gb/s connection. It spins at 7200 RPM and supports hot-plug installation in compatible bays. The drive suits users who need bulk storage on older platforms limited to the first SATA generation. Buyers requiring the faster throughput of SATA 3Gb/s or 6Gb/s should choose a different model.

Thermals noise and power

Mechanical operation at 7200 RPM produces audible seek noise and measurable heat during sustained reads or writes. Power draw follows typical 3.5 inch hard-drive profiles for the SATA 1.5Gb/s interface. Acoustic output rises under heavy random-access workloads. No active cooling or specialised airflow is specified by the manufacturer.

Build integration

The drive fits a standard 3.5 inch hot-plug bay and connects through a single SATA data cable plus a SATA power connector. Hot-plug capability lets you swap the unit without powering down the host when the chassis and controller support it. The 1.5Gb/s link caps maximum sequential transfer, so the drive will not saturate faster SATA ports. Systems without a 3.5 inch hot-plug bay cannot use this drive as intended.

Pontos fortes

  • 1TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • SATA 1.5Gb/s interface connects to compatible motherboards and controllers
  • 5-inch hot-plug form factor allows drive swaps without system shutdown
  • New condition ensures full manufacturer-rated reliability

Especificações

InterfaceSATA 1.5Gb/s
Capacity1TB
RPM7200 RPM

Perguntas sobre este artigo

How do I install the 3.5 inch hot-plug drive into an HP server tray?

Slide the drive into the hot-plug carrier until the connector seats on the backplane, then secure the carrier latch; the SATA 1.5Gb/s interface requires no jumper configuration.

What maintenance or replacement will the 7200 RPM drive need later?

Mechanical drives can develop bad sectors or bearing wear over time; plan to replace the unit if SMART reallocated-sector counts rise or unusual noise appears.

What limit appears first during sustained writes on the 1.5Gb/s SATA link?

The 1.5Gb/s interface caps sustained transfer rates, so throughput plateaus at the link speed before the 7200 RPM platters reach their own sequential ceiling.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.