Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Rectangular metal ATX power supply unit with ventilation grille and label showing 240W 24V 10A

KHACHIMO

KHACHIMO 1478180000 PRO MAX3 240W 24V 10A power supply

SKU CH-GZ6P-TBE9X

A 240 W ATX switching supply delivering 24 V at 10 A, tested and ready for new builds

  • TypeATX
  • Delivers 240 W output for demanding loads
  • Provides stable 24 V at 10 A current
  • ATX form factor fits standard chassis
  • Tested working and built with good quality

KHACHIMO 240W ATX power supply

The KHACHIMO PRO MAX3 delivers 240 watts of continuous power through a standard ATX form factor. It provides a single 24 volt rail rated at 10 amps for systems that require this specific voltage output. The unit is supplied new and has been tested for correct operation before shipment. It suits builds needing a straightforward 24V ATX source without additional rails.

Thermals noise and power draw in normal use

The supply uses a switching topology that maintains efficiency across typical load ranges, reducing waste heat compared to linear designs. A built-in fan moves air through the chassis to keep internal temperatures stable during sustained operation. Acoustic output remains low enough for standard desktop environments under normal loads. Power draw from the mains scales with the connected load up to the 240W rating.

Punti di forza

  • Delivers 240 W output for demanding loads
  • Provides stable 24 V at 10 A current
  • ATX form factor fits standard chassis
  • Tested working and built with good quality

Caratteristiche tecniche

TypeATX

Domande su questo articolo

How do I install the 240W 24V 10A ATX power supply and what step is often missed?

Mount the unit in the ATX bay, connect the 24-pin motherboard cable and CPU power lead, then verify the rear voltage selector is set to your local mains input before switching on.

What maintenance will the 240W 24V 10A switching power supply need later?

Clean dust from the intake vents and internal fan every few months using compressed air; if the fan becomes noisy or output voltage drifts, replace the entire unit.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.