Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular metal ATX power supply unit with ventilation grille and label showing 240W 24V 10A

KHACHIMO

KHACHIMO 1478180000 PRO MAX3 240W 24V 10A power supply

SKU CH-GZ6P-TBE9X

A 240 W ATX switching supply delivering 24 V at 10 A, tested and ready for new builds

  • TypeATX
  • Delivers 240 W output for demanding loads
  • Provides stable 24 V at 10 A current
  • ATX form factor fits standard chassis
  • Tested working and built with good quality

KHACHIMO 240W ATX power supply

The KHACHIMO PRO MAX3 delivers 240 watts of continuous power through a standard ATX form factor. It provides a single 24 volt rail rated at 10 amps for systems that require this specific voltage output. The unit is supplied new and has been tested for correct operation before shipment. It suits builds needing a straightforward 24V ATX source without additional rails.

Thermals noise and power draw in normal use

The supply uses a switching topology that maintains efficiency across typical load ranges, reducing waste heat compared to linear designs. A built-in fan moves air through the chassis to keep internal temperatures stable during sustained operation. Acoustic output remains low enough for standard desktop environments under normal loads. Power draw from the mains scales with the connected load up to the 240W rating.

Pluspunten

  • Delivers 240 W output for demanding loads
  • Provides stable 24 V at 10 A current
  • ATX form factor fits standard chassis
  • Tested working and built with good quality

Specificaties

TypeATX

Vragen over dit artikel

How do I install the 240W 24V 10A ATX power supply and what step is often missed?

Mount the unit in the ATX bay, connect the 24-pin motherboard cable and CPU power lead, then verify the rear voltage selector is set to your local mains input before switching on.

What maintenance will the 240W 24V 10A switching power supply need later?

Clean dust from the intake vents and internal fan every few months using compressed air; if the fan becomes noisy or output voltage drifts, replace the entire unit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.