Kingston Technology Corp. KSM56R46BD4PMI-64MDI 64GB DDR5 5600 CL46 Registered Server RAM
- 64GB
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Kingston Technology Corp.
A 96 GB DDR5-5600 registered ECC DIMM with CL46 latency, 2Rx4 organisation and 1.10 V operation for high-capacity server workloads
Option Hynix, Full Lock
This Kingston module delivers 96GB of DDR5-5600 memory with CL46 latency and a registered signal. It operates at 1.10V using a 288-pin RDIMM form factor and Hynix M-Die components. The unit is new and built for server platforms that require error-correcting code.
The registered design and ECC function target multi-socket servers and workstations that support RDIMMs. Systems without registered memory support or ECC capability cannot use this module. Desktop boards and consumer laptops will not accept it.
The dual-rank 2Rx4 layout provides the density needed for large memory configurations at the rated 5600 MT/s speed. Verify that your motherboard and CPU combination supports 96GB 2Rx4 RDIMMs at this data rate before purchasing.
| Brand | Kingston |
|---|---|
| Model | KSM56R46BD4PMI-96HMI |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Timing | 46-45-45 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Hynix M-Die |
| Heat Spreader | No |
| Features | Kingston's KSM56R46BD4PMI-96HMI is a 12G x 80-bit (96GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 2Rx4, ECC, memory module, based on forty 6G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR5-5600 timing of 46-45-45 at 1.1V. |
| Peso di spedizione | 0.02 kg |
| Dimensioni del pacco | 146 × 44 × 8 mm |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The module fits a 288-pin DDR5 RDIMM slot and operates at 1.10 V.
Align the key notch with the slot, press firmly until both retention clips click, then enable ECC and registered mode in the BIOS.
No scheduled maintenance is required; if a memory test later flags correctable ECC errors, replace the module.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?