Kingston Technology Corp. KSM56R46BD4PMI-64MDI 64GB DDR5 5600 CL46 Registered Server RAM
- 64GB
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Kingston Technology Corp.
A 96 GB DDR5-5600 registered ECC DIMM with CL46 latency, 2Rx4 organisation and 1.10 V operation for high-capacity server workloads
Option Hynix, Full Lock
This Kingston module delivers 96GB of DDR5-5600 memory with CL46 latency and a registered signal. It operates at 1.10V using a 288-pin RDIMM form factor and Hynix M-Die components. The unit is new and built for server platforms that require error-correcting code.
The registered design and ECC function target multi-socket servers and workstations that support RDIMMs. Systems without registered memory support or ECC capability cannot use this module. Desktop boards and consumer laptops will not accept it.
The dual-rank 2Rx4 layout provides the density needed for large memory configurations at the rated 5600 MT/s speed. Verify that your motherboard and CPU combination supports 96GB 2Rx4 RDIMMs at this data rate before purchasing.
| Brand | Kingston |
|---|---|
| Model | KSM56R46BD4PMI-96HMI |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Timing | 46-45-45 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Hynix M-Die |
| Heat Spreader | No |
| Features | Kingston's KSM56R46BD4PMI-96HMI is a 12G x 80-bit (96GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 2Rx4, ECC, memory module, based on forty 6G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR5-5600 timing of 46-45-45 at 1.1V. |
| Peso de envío | 0.02 kg |
| Dimensiones del paquete | 146 × 44 × 8 mm |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The module fits a 288-pin DDR5 RDIMM slot and operates at 1.10 V.
Align the key notch with the slot, press firmly until both retention clips click, then enable ECC and registered mode in the BIOS.
No scheduled maintenance is required; if a memory test later flags correctable ECC errors, replace the module.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?