Kingston Technology Corp. KSM56R46BS8PMI-16MDI 16GB DDR5 5600MT/s ECC Registered server RAM
- 16GB
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Kingston Technology Corp.
A 32 GB DDR5 registered ECC DIMM running at 5600 MHz with CL46 latency for server workloads
Option Hynix, Full Lock
This 32 GB DDR5-5600 module is a registered ECC DIMM built for servers and workstations that require error-correcting memory. The single-rank 1Rx4 organisation and CL46 timing suit multi-socket platforms where stability outweighs raw latency. It is not for desktop boards that accept only unbuffered non-ECC memory.
Registered signalling reduces electrical load on the memory bus, while on-die ECC and x80 ECC with two independent I/O sub-channels correct single-bit errors inside the DRAM before data leaves the module. Hard and soft post-package repair plus sideband I3C/I2C access give the platform firmware extra tools for health monitoring and recovery.
The module runs at 5600 MT/s with 46-45-45 timings at 1.10 V, delivering PC5-44800 bandwidth in a 288-pin RDIMM form factor. That speed and voltage combination is the decisive spec: the motherboard and CPU memory controller must both support DDR5-5600 registered operation at this voltage for the DIMM to function.
| Brand | Kingston |
|---|---|
| Model | KSM56R46BS4PMI-32HAI |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Timing | 46-45-45 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Features | Power Supply: VDD = 1.1V Typical VDDQ = 1.1V Typical VPP = 1.8V Typical VDDSPD = 1.8V to 2.0V On-Die ECC x80 ECC (x40, 2 independent I/O sub channels) 32 internal banks Hard/Soft Post Package Repair Sideband access with I3C/I2C PCB: Height 1.23" (31.25mm) RoHS Compliant and Halogen-Free |
| Peso de envío | 0.45 kg |
| Dimensiones del paquete | 178 × 127 × 51 mm |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The module ships without a heat spreader; its 1.10 V operating voltage and 31.25 mm height fit standard server airflow, so no retrofit is required.
The registered buffer and CL46 latency set the throughput ceiling before thermal or power limits are reached.
At 1.10 V typical VDD and VDDQ the module draws low power per DIMM; server chassis airflow handles the resulting heat without extra cooling.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?