Kingston Technology Corp. KSM56R46BS8PMI-16MDI 16GB DDR5 5600MT/s ECC Registered server RAM
- 16GB
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
A 32 GB DDR5 registered ECC DIMM running at 5600 MHz with CL46 latency for server workloads
Option Hynix, Full Lock
This 32 GB DDR5-5600 module is a registered ECC DIMM built for servers and workstations that require error-correcting memory. The single-rank 1Rx4 organisation and CL46 timing suit multi-socket platforms where stability outweighs raw latency. It is not for desktop boards that accept only unbuffered non-ECC memory.
Registered signalling reduces electrical load on the memory bus, while on-die ECC and x80 ECC with two independent I/O sub-channels correct single-bit errors inside the DRAM before data leaves the module. Hard and soft post-package repair plus sideband I3C/I2C access give the platform firmware extra tools for health monitoring and recovery.
The module runs at 5600 MT/s with 46-45-45 timings at 1.10 V, delivering PC5-44800 bandwidth in a 288-pin RDIMM form factor. That speed and voltage combination is the decisive spec: the motherboard and CPU memory controller must both support DDR5-5600 registered operation at this voltage for the DIMM to function.
| Brand | Kingston |
|---|---|
| Model | KSM56R46BS4PMI-32HAI |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Timing | 46-45-45 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Features | Power Supply: VDD = 1.1V Typical VDDQ = 1.1V Typical VPP = 1.8V Typical VDDSPD = 1.8V to 2.0V On-Die ECC x80 ECC (x40, 2 independent I/O sub channels) 32 internal banks Hard/Soft Post Package Repair Sideband access with I3C/I2C PCB: Height 1.23" (31.25mm) RoHS Compliant and Halogen-Free |
| وزن الشحنة | 0.45 kg |
| أبعاد الطرد | 178 × 127 × 51 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module ships without a heat spreader; its 1.10 V operating voltage and 31.25 mm height fit standard server airflow, so no retrofit is required.
The registered buffer and CL46 latency set the throughput ceiling before thermal or power limits are reached.
At 1.10 V typical VDD and VDDQ the module draws low power per DIMM; server chassis airflow handles the resulting heat without extra cooling.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟