Kingston Technology Corp. KSM56R46BS8PMI-16MDI 16GB DDR5 5600MT/s ECC Registered server RAM
- 16GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
A 32 GB DDR5 registered ECC DIMM running at 5600 MHz with CL46 latency for server workloads
Option Hynix, Full Lock
This 32 GB DDR5-5600 module is a registered ECC DIMM built for servers and workstations that require error-correcting memory. The single-rank 1Rx4 organisation and CL46 timing suit multi-socket platforms where stability outweighs raw latency. It is not for desktop boards that accept only unbuffered non-ECC memory.
Registered signalling reduces electrical load on the memory bus, while on-die ECC and x80 ECC with two independent I/O sub-channels correct single-bit errors inside the DRAM before data leaves the module. Hard and soft post-package repair plus sideband I3C/I2C access give the platform firmware extra tools for health monitoring and recovery.
The module runs at 5600 MT/s with 46-45-45 timings at 1.10 V, delivering PC5-44800 bandwidth in a 288-pin RDIMM form factor. That speed and voltage combination is the decisive spec: the motherboard and CPU memory controller must both support DDR5-5600 registered operation at this voltage for the DIMM to function.
| Brand | Kingston |
|---|---|
| Model | KSM56R46BS4PMI-32HAI |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Timing | 46-45-45 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Features | Power Supply: VDD = 1.1V Typical VDDQ = 1.1V Typical VPP = 1.8V Typical VDDSPD = 1.8V to 2.0V On-Die ECC x80 ECC (x40, 2 independent I/O sub channels) 32 internal banks Hard/Soft Post Package Repair Sideband access with I3C/I2C PCB: Height 1.23" (31.25mm) RoHS Compliant and Halogen-Free |
| Shipping weight | 0.45 kg |
| Package size | 178 × 127 × 51 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module ships without a heat spreader; its 1.10 V operating voltage and 31.25 mm height fit standard server airflow, so no retrofit is required.
The registered buffer and CL46 latency set the throughput ceiling before thermal or power limits are reached.
At 1.10 V typical VDD and VDDQ the module draws low power per DIMM; server chassis airflow handles the resulting heat without extra cooling.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?