NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Kingston Technology Corp.
16GB DDR4 3200 ECC unbuffered DIMM with CL22 latency and 1.2V operation
This 16 GB DDR4 3200 ECC unbuffered DIMM targets servers and workstations that require error-correcting memory without registered buffering. It fits platforms accepting 288-pin DDR4 UDIMMs at 1.20 V. Builders needing registered RDIMMs or higher capacities per slot cannot use this module.
The module runs at DDR4 3200 (PC4 25600) with CL22 latency and 1Rx8 organisation, delivering stable throughput during extended workloads. ECC corrects single-bit errors in real time, preventing data corruption during long compute or virtualisation tasks. Unbuffered design keeps latency low for memory-controller-bound applications.
The 288-pin DDR4 form factor installs in standard UDIMM slots; no extra cables or brackets are required. Most issues arise when the platform expects registered memory or a different rank configuration, causing the system to fail POST. Verify the motherboard supports unbuffered ECC UDIMMs before purchase.
| Brand | Kingston |
|---|---|
| Model | KTL-TS432ES8/16G |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Features | DDR4 3200MHz ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 16Gbit |
| Peso di spedizione | 0.09 kg |
| Dimensioni del pacco | 152 × 76 × 8 mm |
The module operates at 1.20V standard DDR4 voltage with CL22 timing, typical for low-power server DIMMs running all day.
A DDR4 288-pin slot with ECC support and an unbuffered memory controller is needed; registered or load-reduced boards will not accept it.
The memory controller will downclock all modules to the lowest common speed, so this DIMM will run at the slower kit's frequency.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?