NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Kingston Technology Corp.
16GB DDR4 3200 ECC unbuffered DIMM with CL22 latency and 1.2V operation
This 16 GB DDR4 3200 ECC unbuffered DIMM targets servers and workstations that require error-correcting memory without registered buffering. It fits platforms accepting 288-pin DDR4 UDIMMs at 1.20 V. Builders needing registered RDIMMs or higher capacities per slot cannot use this module.
The module runs at DDR4 3200 (PC4 25600) with CL22 latency and 1Rx8 organisation, delivering stable throughput during extended workloads. ECC corrects single-bit errors in real time, preventing data corruption during long compute or virtualisation tasks. Unbuffered design keeps latency low for memory-controller-bound applications.
The 288-pin DDR4 form factor installs in standard UDIMM slots; no extra cables or brackets are required. Most issues arise when the platform expects registered memory or a different rank configuration, causing the system to fail POST. Verify the motherboard supports unbuffered ECC UDIMMs before purchase.
| Brand | Kingston |
|---|---|
| Model | KTL-TS432ES8/16G |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Features | DDR4 3200MHz ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 16Gbit |
| Peso de envío | 0.09 kg |
| Dimensiones del paquete | 152 × 76 × 8 mm |
The module operates at 1.20V standard DDR4 voltage with CL22 timing, typical for low-power server DIMMs running all day.
A DDR4 288-pin slot with ECC support and an unbuffered memory controller is needed; registered or load-reduced boards will not accept it.
The memory controller will downclock all modules to the lowest common speed, so this DIMM will run at the slower kit's frequency.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?