NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Kingston Technology Corp.
16 GB DDR3 1600 ECC Registered server memory with CL11 latency and 1.35 V operation
This 16GB DDR3 module runs at 1600 MT/s with CL11 latency and 1.35 V operation. It uses a 240-pin registered DIMM layout with on-board ECC for data integrity. The component is built with Hynix A-die FBGA chips in a 2G x 72 configuration. It targets administrators who need consistent, validated memory for 24/7 server workloads.
The jump is worthwhile when the platform requires registered signalling and error correction for multi-DIMM channels. Systems that currently run standard unbuffered memory cannot accept this module because the register changes the electrical load. Upgrade only after confirming the motherboard specifies registered ECC support in its qualified vendor list.
Align the notch with the keyed slot and press evenly until the retention clips engage. The most common issue is mixing registered and unbuffered modules in the same channel, which prevents boot. Another frequent problem is exceeding the platform’s maximum rank count per channel, so verify the server’s population rules before adding more sticks.
| Brand | Kingston |
|---|---|
| Model | KVR16LR11D4/16HA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Features | Standard 2G X 72 FBGA, Gold w/TS |
| Peso di spedizione | 0.04 kg |
| Dimensioni del pacco | 169 × 55 × 14 mm |
This module uses the standard 240-pin DDR3 SDRAM layout, so it fits any server DIMM slot designed for DDR3 registered memory.
Align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, and verify the system recognises the full 16 GB at 1600 MT/s.
No routine maintenance is needed; ECC correction and registered buffering are handled automatically by the memory controller, and the low-voltage 1.35 V operation runs within standard DDR3 specifications.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?