NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Kingston Technology Corp.
512 MB DDR 333 (PC 2700) ECC registered server memory with CL2.5 latency and 2.50 V operation
This 512MB DDR 333 (PC 2700) module uses 184-pin SDRAM with ECC and registered buffering. It runs at CL2.5 latency and 2.50V for server platforms that require registered memory. The stick has no heat spreader. It suits maintenance or expansion of legacy DDR systems.
Replacing a single unbuffered DIMM with this registered module adds error correction and signal integrity for multi-DIMM configurations. The jump is worth it when the motherboard chipset demands registered memory and will not post with unbuffered sticks. It does not suit boards that only accept unbuffered DDR or that require higher densities per slot.
The module slots into 184-pin DDR sockets that support PC 2700 registered ECC memory. It frees a slot for additional registered DIMMs up to the board's population limits. It requires a server chipset that enables registered buffering and ECC; consumer desktop boards typically disable both features.
| Brand | Kingston |
|---|---|
| Model | KVR333X72BRC25/512 |
| Capacity | 512MB |
| Type | 184-Pin DDR SDRAM |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Peso di spedizione | 0.09 kg |
| Dimensioni del pacco | 178 × 51 × 25 mm |
The module uses the standard 184-pin DDR SDRAM form factor, so it fits any server board with 184-pin DDR slots keyed for 2.5 V operation.
Align the notch with the slot key, press firmly until both retaining clips click, and ensure the registered buffer is supported by the motherboard chipset — skipping the chipset check is the common error.
Replace it if memory diagnostics report correctable ECC errors rising over time, or when a platform upgrade requires faster than DDR 333 speeds.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?