NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Kingston Technology Corp.
512 MB DDR 333 (PC 2700) ECC registered server memory with CL2.5 latency and 2.50 V operation
This 512MB DDR 333 (PC 2700) module uses 184-pin SDRAM with ECC and registered buffering. It runs at CL2.5 latency and 2.50V for server platforms that require registered memory. The stick has no heat spreader. It suits maintenance or expansion of legacy DDR systems.
Replacing a single unbuffered DIMM with this registered module adds error correction and signal integrity for multi-DIMM configurations. The jump is worth it when the motherboard chipset demands registered memory and will not post with unbuffered sticks. It does not suit boards that only accept unbuffered DDR or that require higher densities per slot.
The module slots into 184-pin DDR sockets that support PC 2700 registered ECC memory. It frees a slot for additional registered DIMMs up to the board's population limits. It requires a server chipset that enables registered buffering and ECC; consumer desktop boards typically disable both features.
| Brand | Kingston |
|---|---|
| Model | KVR333X72BRC25/512 |
| Capacity | 512MB |
| Type | 184-Pin DDR SDRAM |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Peso de envío | 0.09 kg |
| Dimensiones del paquete | 178 × 51 × 25 mm |
The module uses the standard 184-pin DDR SDRAM form factor, so it fits any server board with 184-pin DDR slots keyed for 2.5 V operation.
Align the notch with the slot key, press firmly until both retaining clips click, and ensure the registered buffer is supported by the motherboard chipset — skipping the chipset check is the common error.
Replace it if memory diagnostics report correctable ECC errors rising over time, or when a platform upgrade requires faster than DDR 333 speeds.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?