Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small rectangular e-paper display module with red black white pixels 2.66inch 296x152

LORDWORLD

LORDWORLD 2.66inch E-Paper Display Module (B) 296×152

SKU CH-DVFT-WPNMN

A 2.66 inch e-paper module shows 296 by 152 pixels in red, black and white without a backlight, retains images after power loss, draws power only during refresh.

  • Retains image without power thanks to no backlight
  • Ultra-low power draw as energy only needed for refresh
  • SPI interface uses minimal GPIO pins on controller
  • 296×152 pixel resolution on 2.66 inch screen
  • Includes C/C++ and MicroPython examples for Raspberry Pi Pico

2.66-inch E-Paper Display for Pico

This 2.66-inch E-Paper module provides a 296×152 pixel red, black and white screen that connects to a Raspberry Pi Pico via SPI. It is aimed at makers and IoT developers who need a low-power, persistent display for sensor readouts, status badges or simple graphics without a backlight.

Thermals noise and power draw

The panel consumes power only during refresh cycles and retains the last image indefinitely with no supply connected, so heat output and fan noise are effectively zero. The SPI link keeps pin count low, leaving the rest of the Pico’s GPIOs free for other sensors or actuators in battery-powered projects.

Bundled resources and examples

The package includes development resources and a manual with C/C++ and MicroPython examples written for the Raspberry Pi Pico, letting you drive the display and render graphics immediately. No separate driver libraries or configuration files need to be sourced, reducing bring-up time for prototype hardware.

Punti di forza

  • Retains image without power thanks to no backlight
  • Ultra-low power draw as energy only needed for refresh
  • SPI interface uses minimal GPIO pins on controller
  • 296×152 pixel resolution on 2.66 inch screen
  • Includes C/C++ and MicroPython examples for Raspberry Pi Pico

Caratteristiche tecniche

BrandLORDWORLD

Domande su questo articolo

How do I wire the SPI pins on this 2.66inch module to a Raspberry Pi Pico?

Connect the module's SPI pins to the Pico's corresponding SPI pins and supply power; the common mistake is forgetting the BUSY line, which the driver needs to wait for each refresh.

What maintenance will the 296×152 red/black/white e-paper need over time?

No backlight or moving parts exist, so only occasional cleaning of the glass surface is required; the panel retains its last image without power.

What limit appears first during sustained use of this SPI e-paper display?

The refresh cycle is the bottleneck — each full update takes seconds, so rapid animations or frequent full-screen rewrites are not practical.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.