저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Small rectangular e-paper display module with red black white pixels 2.66inch 296x152

LORDWORLD

LORDWORLD 2.66inch E-Paper Display Module (B) 296×152

SKU CH-DVFT-WPNMN

A 2.66 inch e-paper module shows 296 by 152 pixels in red, black and white without a backlight, retains images after power loss, draws power only during refresh.

  • Retains image without power thanks to no backlight
  • Ultra-low power draw as energy only needed for refresh
  • SPI interface uses minimal GPIO pins on controller
  • 296×152 pixel resolution on 2.66 inch screen
  • Includes C/C++ and MicroPython examples for Raspberry Pi Pico

2.66-inch E-Paper Display for Pico

This 2.66-inch E-Paper module provides a 296×152 pixel red, black and white screen that connects to a Raspberry Pi Pico via SPI. It is aimed at makers and IoT developers who need a low-power, persistent display for sensor readouts, status badges or simple graphics without a backlight.

Thermals noise and power draw

The panel consumes power only during refresh cycles and retains the last image indefinitely with no supply connected, so heat output and fan noise are effectively zero. The SPI link keeps pin count low, leaving the rest of the Pico’s GPIOs free for other sensors or actuators in battery-powered projects.

Bundled resources and examples

The package includes development resources and a manual with C/C++ and MicroPython examples written for the Raspberry Pi Pico, letting you drive the display and render graphics immediately. No separate driver libraries or configuration files need to be sourced, reducing bring-up time for prototype hardware.

주요 특징

  • Retains image without power thanks to no backlight
  • Ultra-low power draw as energy only needed for refresh
  • SPI interface uses minimal GPIO pins on controller
  • 296×152 pixel resolution on 2.66 inch screen
  • Includes C/C++ and MicroPython examples for Raspberry Pi Pico

사양

BrandLORDWORLD

이 상품에 대한 질문

How do I wire the SPI pins on this 2.66inch module to a Raspberry Pi Pico?

Connect the module's SPI pins to the Pico's corresponding SPI pins and supply power; the common mistake is forgetting the BUSY line, which the driver needs to wait for each refresh.

What maintenance will the 296×152 red/black/white e-paper need over time?

No backlight or moving parts exist, so only occasional cleaning of the glass surface is required; the panel retains its last image without power.

What limit appears first during sustained use of this SPI e-paper display?

The refresh cycle is the bottleneck — each full update takes seconds, so rapid animations or frequent full-screen rewrites are not practical.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.