Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green Raspberry Pi Pico RP2040 board with pre-soldered header pins

LORDWORLD

LORDWORLD Raspberry Pi Pico RP2040 Development Board Pre-soldered Header

SKU CH-SCTS-SZP78

Microcontroller board with RP2040 dual-core Arm Cortex M0+ at 133 MHz, 264 KB SRAM, 2 MB Flash and 26 GPIO pins, header pre-soldered

  • Dual-core Arm Cortex M0+ processor reaches 133 MHz
  • 264 KB SRAM and 2 MB Flash store code and data
  • 26 multi-function GPIO pins connect sensors and actuators
  • Pre-soldered header allows immediate breadboard use
  • C/C++ SDK and MicroPython support simplify development

Ready-to-use RP2040 microcontroller board

The LORDWORLD board brings the Raspberry Pi RP2040 dual-core Arm Cortex M0+ processor to a development board with headers already soldered in place. It targets makers, students and engineers who want to start writing C, C++ or MicroPython code immediately without a soldering iron. The 26 multi-function GPIO pins are accessible straight from the box.

264 KB SRAM and 2 MB Flash define the working

The 264 KB of embedded SRAM and 2 MB of on-board Flash memory handle typical sensor-logging, motor-control and small protocol-bridging tasks comfortably. Projects that require large frame buffers, heavy RTOS footprints or extensive local data logging will exceed the available memory and need external storage or a larger controller.

Pre-soldered header is the deciding convenience

The board ships with the 26-pin header factory-fitted, removing the only assembly step between unboxing and first upload. Buyers who need a headerless footprint for ultra-thin enclosures or who prefer custom pin arrangements cannot modify this unit without desoldering.

Punti di forza

  • Dual-core Arm Cortex M0+ processor reaches 133 MHz
  • 264 KB SRAM and 2 MB Flash store code and data
  • 26 multi-function GPIO pins connect sensors and actuators
  • Pre-soldered header allows immediate breadboard use
  • C/C++ SDK and MicroPython support simplify development

Caratteristiche tecniche

BrandLORDWORLD

Domande su questo articolo

Can the 26 GPIO pins on this RP2040 board connect directly to my older 5 V components?

The board exposes 26 multi-function GPIO pins from the RP2040; check each peripheral's voltage requirements and add level shifting where needed.

How can I verify the dual-core Arm Cortex M0+ is running at up to 133 MHz after I flash code?

Toggle a GPIO pin in a tight loop and measure the frequency with an oscilloscope or logic analyser; the observed rate will reflect the 133 MHz clock.

Does the pre-soldered header mean I need to buy any connectors or cables separately to start prototyping?

The header pins are already soldered, so you can plug jumper wires or a breadboard straight away; only a USB cable for power and programming is required.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.