저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green Raspberry Pi Pico RP2040 board with pre-soldered header pins

LORDWORLD

LORDWORLD Raspberry Pi Pico RP2040 Development Board Pre-soldered Header

SKU CH-SCTS-SZP78

Microcontroller board with RP2040 dual-core Arm Cortex M0+ at 133 MHz, 264 KB SRAM, 2 MB Flash and 26 GPIO pins, header pre-soldered

  • Dual-core Arm Cortex M0+ processor reaches 133 MHz
  • 264 KB SRAM and 2 MB Flash store code and data
  • 26 multi-function GPIO pins connect sensors and actuators
  • Pre-soldered header allows immediate breadboard use
  • C/C++ SDK and MicroPython support simplify development

Ready-to-use RP2040 microcontroller board

The LORDWORLD board brings the Raspberry Pi RP2040 dual-core Arm Cortex M0+ processor to a development board with headers already soldered in place. It targets makers, students and engineers who want to start writing C, C++ or MicroPython code immediately without a soldering iron. The 26 multi-function GPIO pins are accessible straight from the box.

264 KB SRAM and 2 MB Flash define the working

The 264 KB of embedded SRAM and 2 MB of on-board Flash memory handle typical sensor-logging, motor-control and small protocol-bridging tasks comfortably. Projects that require large frame buffers, heavy RTOS footprints or extensive local data logging will exceed the available memory and need external storage or a larger controller.

Pre-soldered header is the deciding convenience

The board ships with the 26-pin header factory-fitted, removing the only assembly step between unboxing and first upload. Buyers who need a headerless footprint for ultra-thin enclosures or who prefer custom pin arrangements cannot modify this unit without desoldering.

주요 특징

  • Dual-core Arm Cortex M0+ processor reaches 133 MHz
  • 264 KB SRAM and 2 MB Flash store code and data
  • 26 multi-function GPIO pins connect sensors and actuators
  • Pre-soldered header allows immediate breadboard use
  • C/C++ SDK and MicroPython support simplify development

사양

BrandLORDWORLD

이 상품에 대한 질문

Can the 26 GPIO pins on this RP2040 board connect directly to my older 5 V components?

The board exposes 26 multi-function GPIO pins from the RP2040; check each peripheral's voltage requirements and add level shifting where needed.

How can I verify the dual-core Arm Cortex M0+ is running at up to 133 MHz after I flash code?

Toggle a GPIO pin in a tight loop and measure the frequency with an oscilloscope or logic analyser; the observed rate will reflect the 133 MHz clock.

Does the pre-soldered header mean I need to buy any connectors or cables separately to start prototyping?

The header pins are already soldered, so you can plug jumper wires or a breadboard straight away; only a USB cable for power and programming is required.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.